HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI


Home IN DIMOSTRAZIONE ELETTRONICHE DIFFUSORI CAVI CUFFIE MOBILI GIRADISCHI&ACC. SONORIZZAZIONE POLTRONE DIVANI TV SAT VIDEOPROIEZIONE CASA  E  AUTO OCCASIONI PROMOZIONI ORDINI & CONTATTI PRIVACY POLICY


 


GARANTITE E REVISIONATE DELLE MARCHE MIGLIORI

Richiedere sempre  la disponibilita'anche di apparecchi  non  in elenco a:  info@newaudio.it  o al tel.0174 670100



DIFFUSORI

Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


       

TANNOY   RHR            Per offertaTelefonare/ invia  un e-mail

With the RHR. Tannoy pays tribute to its longest serving craftsman. In this loudspeaker. possibly his finest design to date. RonaldHastings Rackham combines the classic styling of which Tannoy is renowned, with advanced sound reproduction capability. The cabinet is sturdy and durable, yet exhibits the finest oiled walnut veneers, inlaid with burr walnut on the front grille divider. Tannoy's classic 15 inch high pressure die-cast frame Dual Concentric drive unit feeds into a rear folded rectangular exponential section horn: it is driven through a hard-wired, acoustic source compensating crossover network supplied by Michell gold-plated terminals . Treble energy and roll-off controls are concealed beneath a nengravedb rassp late located below the drive unit in the front  grille divider. Ronald Hastings Rackham can be justly proud of his namesake.

 

  

INFINITY  EPSYLON               Per offertaTelefonare/ invia  un e-mail  

 Caratteristiche funzionali :Emissione dipolare controllata Livello di emissione dei trasduttori regolabile individualmente Componenti passivi selezionati Connettori massicci placcati in oro Possibilitŕ di collegamento normale, bi-wiring e bi-amping Mobile in legno HDF con rinforzi interni Pannello frontale antirisonanza con spessore 60 mm. Finitura artigianale con lucidatura manuale Colore noce Supporti per disaccoppiamento da terraAltoparlanti perfetti Misure:151.8cmx47cmx 41.3

The Epsilon was the last of the truly top-of-the-line speakers produced by Infinity. Designed by John Miller and Cary Christie after Arnie Nudell had left Infinity, it was designed to be the heir to the IRS Betas, but in a more compact package that was easier to place in a room. The Epsilon was a departure for Infinity, in that, after many years of dipole speakers, it was sealed in the back and was (primarily) monopole. The Epsilon may be the most neutral speaker I’ve ever heard - no coloration of the music at all, just very clean, detailed sound. Its only shortcoming may be a lack of deep bass response, the result of trying to fit everything into a single cabinet.

B&W 802                                       Per offertaTelefonare/ invia  un e-mail  

D e s c r i p t i o n Drive units F requency re s p o n s e S e n s i t i v i t y 3-way mvented-box system 1 x 25mm metal dome high-frequency 1 x 150mm woven Kevlar® cone FST midrange 2 x 200mm paper/Kevlar® cone bass 39Hz – 20kHz ± 2dB on reference axis 91dB spl (2.83V, 1m) Nominal impedance Power handling D i m e n s i o n s F i n i s h e s 8W (min 3.0W) 50W - 500W into 8 ohm on unclipped mprogramme Height: 1106mm Width: 385mm Depth: 548mm Cabinet: Real wood veneers,Cherrywood,  Grilles: Black cloth

B&W 803s                                       Per offertaTelefonare/ invia  un e-mail  

Il modello 803S č il piů grande nell'attuale catalogo ad utilizzare la cupola in alluminio B&W per l’unitŕ alti, quest’ultimo migliorato dall’adozione di una sospensione di nuova concezione, capace di lavorare in maggior in sincronia con la cupola. Questa soluzione permette all’altoparlante di avere una risposta in basso piů estesa e quindi consentire a sua volta l’utilizzo di un crossover semplificato. Altra caratteristica della tecnologia Nautilus č la camera di decompressione dietro al tweeter, questo montato separatamente sul pannello superiore del cabinet. Entrambe le cose - sommate - realizzano un suono di maggior chiarezza. Al tweeter si associa, senza soluzione di continuitŕ, l’unitŕ medi con tecnologia FST, responsabile di un palcoscenico acustico tangibile e tridimensionale. La gamma bassa č affidata a due altoparlanti con cono da cm.18 in Rohacell, operanti in reflex con tubo di accordo frontale dotato di Flowport, trattamento della bocca del condotto che elimina il soffio dell’aria in rapido movimento. La forma a torre č tesa a contenere l'impatto nel'ambiente domestico, differendo dalla serie 803D per l'adozione del tweeter in alluminio. Il sistema acustico opera in configurazione bass-reflex, 3 vie/4 altoparlanti, con una risposta in frequenza, in asse, da 35 Hz a 22 kHz. Struttura interna "Matrix" antirisonanza e per l’irrigidimento del mobile. "Testa" medio/alti in Marlan. L'803S puň riprodurre una poderosa gamma bassa, sia estesa in frequenza, sia in livello di pressione acustica. Nonostante la sensibilitŕ elevata, il suo carico minimo si attesta attorno ai 3 ohm, cosa che la rende compatibile al meglio cion elettroniche di gran classe musicale e sapiente progettazione. Consigliamo al riguardo di visitare le pagine del sito Audiogamma relative a: Primare, Classé Audio, Jeff Rowland D.G. •Potenza applicabile: 50-250W. •Soluzione "Flow Port System" per il contenimento del flusso dell'aria dal tubo di raccordo del reflex. •90dB la sensibilitŕ. 3 vie, 4 altoparlanti, bass reflex, 2 woofer in Rohacell, midrange FST (Fixed Suspension Transducer) in Kevlar, tweeter Nautilus a cupola metallica. Struttura interna Matrix. Predisposta per bi-wiring, potenza 50-200W. Con tecnologia “Flow Port System”. Legno frassino nero, ciliegio o palissandroCoppia  colore  rosenwood

B&W 803 D                                    Per offertaTelefonare/ invia  un e-mail  

L’803D č uno dei nuovi diffusori della Serie 800 dotato di cupola del tweeter in diamante che equipaggia ora i modelli di punta. Ad esso si abbina l’unitŕ medi, con membrana tessuta in Kevlar, priva di sospensione, da cui la tecnologia FST che mira ad ottimizzare i parametri meccanici per fornire una risposta musicale piů neutra e precisa. La “testa” che sostiene il medio č alloggiata in un cabinet a se stante, perfettamente formato e rifinito, posta in prossimitŕ del tweeter con l’intenzione di uniformare, con la massima capacitŕ di irradiamento, l’emissione dei due trasduttori. Per avere una risposta alle basse paragonabile a quella degli 802D, l’803D impiega ben 3 woofer con membrana in Rohacell da 180 millimetri, coadiuvati dal sistema antiturbolenza Flowport (risposta in frequenza, in asse, da 35 Hz a 28 kHz), posto sul pannello frontale. Come tutti drivers specializzati B&W per la gamma bassa, la rigiditŕ dell’area radiante č incrementata dalla innovativa costruzione a “fungo”, che interessa la zona centrale del parapolvere. In questo modello abbiamo tre diversi tipi di altoparlante, ognuno ottimizzato per un dato segmento di frequenze, ma č il risultato d’assieme che rende questo modello assolutamente entusiasmante. Non importa se il suono provenga da CD, DVD o BD, la naturalezza ed il realismo della riproduzione degli 803D sono formidabili. Il sistema acustico opera in configurazione bass-reflex, 3 vie/5 altoparlanti, con una. Struttura interna "Matrix" antirisonanza e di irrigidimento del mobile. Data la grande qualitŕ complessiva del disegno e le notevoli potenzialitŕ di riproduzione, la scelta dei partners per gli 803D deve essere quanto mai accurata. Per le sorgenti, si consiglia di visitare le pagina Audiogamma relative ai marchi Classé, Esoteric, VPI, ProJect, Primare, mentre per le amplificazioni Classč Audio, Jeff Rowland D.G, e Primare (pre + finali). Cablaggio di qualitŕ č auspicabile se non obbligario (vedi Audioquest). •Potenza applicabile: 50-500W. •Sensibilitŕ: 90dB 1W/1m Coppia  colre   nero  lucido

B&W 803 D2                                    Per offertaTelefonare/ invia  un e-mail  

3 vie, 5 altoparlanti, bass reflex, 3 woofer in Rohacell, midrange FST (Fixed Suspension  Transducer) in Kevlar, tweeter Nautilus con cupola in diamante. Struttura interna Matrix. Predisposta per bi-wiring, potenza 50-375W. Con tecnologia “Flow Port System”. Legno laccato nero, ciliegio o palissandro.Coppia  colore  rosenwood

MBL                                              Per offertaTelefonare/ invia  un e-mail  


 

CHARIO  LYNX                          Per offerta Telefonare/ invia  un e-mail
Con una volume di carico del mobile di 1000 cm3 , il modello lynx pur definendo un piccolo ingrombo ha prestazioni che comparate ad altri diffusori ben piů voluminosi e di categorie di prezzo superiori non hanno niente da invidiare. Il risultato in termine di riproduzione dell’evento musicale č di altissimo livello, uno stage ampio e profondo accompagnato da una naturalezza di emissione disarmante sono capaci di entusiasmare anche il piů scettico rispetto alle misure del diffusore stesso. La dinamica č limitata per le proprie caratteristiche ma la prestazione č perfettamente equilibrata per dare un risultato appagante.E’ dotata di piedini di sospensione realizzati in un agglomerato gommoso in grado di smorzare le vibrazioni della struttura del mobile ulteriormente, che oltretutto garantiscono la minima distanza che deve avere la parte inferiore del mobile dalla superficie per garantire la piena efficienza del sistema bass reflex. La grigia frontale di protezione per le versioni in legno massello č posizionabile sul frontale del diffusore tramite i 4 appositi pin, mentre per le versioni lucide ed opache č dotata di 4 magneti al neodimio.Entry level della famiglia Constellation, le Lynx si sono imposte imediatamente per le doti di alta risoluzione e per la capacitŕ di emettere un fronte sonoro grande. Le nuove conoscenze percettive acquisite nel nostro laboratorio, una volta applicate al T38 WG rivelano la correttezza della filosofia progettuale della Chario Loudspeakers, che risulta essere scalabile, quindi adatta a grandi e piccoli sistemi. Low frequency load Vented NRS  Configuration 2 Way  Drivers 1 tweeter 38 mm soft dome  1 woofer 130 mm paper compound  Sensitivity 87 dB SPL  Frequency @-3dB 67 - 20000 Hz  Xover frequency 1500 Hz  Rated impedance 4 Ω  Altezza 360 mm  Larghezza 200 mm  Profonditŕ 200 mm  Peso: 10 Kg  Noce massello

ELECTRO VOICE   STATUS 60                                           Per offertaTelefonare/ invia  un e-mail

Facevano parte dell'ultima serie di diffusori home della EV, era il modello di punta con woofer in polipropilene da 12", medio della Sentry 500 e sptw 92 db tre vie woofer da 30 cm mid e tweeter caricati da breve tromba

KEF REFERENCE   101/3                                  Per offertaTelefonare/ invia  un e-mail

Revision to this long-standing quality bookshelf loudspeaker converted it to a reflex enclosure for extra bass and output capability. With added refinements to the drivers and crossover network, the 101 found a new lease of life and continued to be a strong product for KEF in the bookshelf monitor sector. Specification: Model 101/3 System Type: Two-way, bookshelf/stand-mount Enclosure type: Reflex Dimensions (H x W x D): 330 x 215 x 262mm (13 x 8.5 x 10.4 inches) Weight: 7.2kg (15.8 lb) Nominal impedance: 6ohms Amplifier requirements: 50-150W (into 4 ohms) Frequency range: 60Hz to 20kHz +/-2.5dB at 2m on reference axis Sensitivity: 87dB at 1m on reference axis for a pink noise input of 2.83V (anechoic conditions) Maximum output: 106dB on programme peaks under typical listening conditions *corrected for wall or shelf placement System: SP3161 Drive units: B160 bass/midrange unit (SP1309), NT19 tweeter (SP1352) Crossover: SP2199

Infinity reference  RS4000                    Per offertaTelefonare/ invia  un e-mail

SPECIFICATIONS INFINITY SYSTEMS INC., 250 Crossways Park Drive, Woodbury, New York 11797 REV A 7-98 Nominal Impedance: 6 ohms Power Rating: 25-125 watts RMS Sensitivity: 89dB @ 1 watt, 1 meter Crossover Frequencies: 800Hz and 3,500Hz Frequency Response: 45Hz-45kHz +/-3dB ACOUSTIC & ELECTRICAL SPECIFICATIONS: 1x - EMIT Tweeter 1x - 3.5" (6.5cm) Midrange m1x - 8" (20.3cm) Polypropylene Woofe Dimensions: 22.5"H x 12.5"W" x 10.25"D mPolypropylene  57cm(H) x 31.75cm(W) x 26cm(D)

CELESTION DITTON 4                                     Per offertaTelefonare/ invia  un e-mail

Tipologia di diffusore : sospensione a bass reflex posteriore.Numero delle vie : 3 con 4 altoparlanti. Altoparlanti istallati : 2 woofer da 21 Cm con sospensioni rovesciate in gomma, 1 midrange a cono da 11 Cm, 1 tweeter domme da 3,5 Cm. Frequenza di taglio del crossover : 530 e 3.800 Hz. Risposta in frequenza : 45 - 20.000 Hz. Potenza nominale (RMS) : 150 Watt.  Potenza di utilizzo consigliata : dai 10 ai 150 Watt RMS Impedenza nominale : 8 ohm. Sensibilitŕ : 92,5 dB.(1 watt/1 metro) Griglia : in tessuto nero asportabile.  Rifinitura del mobile : vinile noce. Dimensione (L x H x P) : 35 x 70 x 30,5 Cm. Peso : 16 Kg. (cadauna)

 

  

B&W DS7     €.   695,00    Per ordine e sconto TELEFONA / UN E-MAIL

Diffusore progettato per montaggio a parete, per un utilizzo come canale surround in abbinamento ad altri diffusori della Serie 700. 2 vie, sistema chiuso. Selettore di funzionamento: normale o dipolo. 1 woofer/midrange in Kevlar, 1 tweeter a cupola metallica con caricamento a condotto Nautilus e 2 tw/mid a cono. Potenza raccomandata 50-120 W. Fissaggio a muro tramite asole posteriori.Legno frassino nero o bianco

The DS7 is specifically designed as an on-wall surround speaker for multi-channel audio and home theatre installations.Surround speakers generally fall into two main types – those that one might describe as 'normal' speakers - so-called monopoles, where the sound comes from a set of drive units mounted on the front of the enclosure - and those that give a more diffuse sound field, such as dipoles. Each type has its advantages.Most multi-channel music is monitored using monopole surround speakers, whatever the multi-channel recording format. This enables better location of side and rear images, although the formation of such images is never quite as precise as it is between the front speakers.Most films are originally balanced for cinemas, where a large number of speakers spread around the auditorium ar

INFINITY  QUADROPOLE                         Per offertaTelefonare/ invia  un e-mail 

Altoparlanti  woofer 12.5 cm ,  tweeter  9 cm- risposta  in  frequenza 70hz -45khz 2db   - Frequenza  di taglio 80hz ,1000khz 2db- efficenza 90db/2.83v/1m- impedenza 6ohm- Misure  353x245x114 mm- Peso 3.2kg.


CANALI CENTRALITelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


Martin Logan     STAGE    EX DEMO                                  Per offertaTelefonare/ invia  un e-mail  

Stage™  Il diffusore Stage™ rappresenta un’espressione molto evoluta delle idee e delle tecniche che hanno portato alla realizzazione dei leggendari diffusori per canale centrale Logos™ e Theater™. Grazie a molte delle tecnologie piů raffinate, tra cui il pannello elettrostatico XStat™, i woofer con cono in alluminio da cm 16,5 ed il crossover Vojtko, lo Stage pone nuovi standard per il comportamento musicale. La precisione e l’intelligibilitŕ della riproduzione di questo diffusore non sono seconde a nessuno. Fornito di un particolare supporto, lo Stage č un diffusore molto versatile che si comporta estremamente bene come canale principale, centrale o surround, montato sulla parete o lontano da essa, in posizione verticale od orizzontale. Sono ben pochi i diffusori (i nostri modelli elettrostatici da pavimento) che possono pareggiare o superare lo Stage in una di queste applicazioni, mentre nessuno puň superare la sua versatilitŕ. Il suono dello Stage č semplicemente glorioso. Trasduttore XStat™ L’avanzata tecnologia degli statori MicroPerf, i distanziatori ClearSpar e la straordinaria soluzione Vacuum Bonding si combinano con la sorprendente topologia del crossover, per aumentare grandemente l’efficienza ed avere restituzioni dinamiche naturali e senza limiti. Tecnologia ClearSpar™ I distanziatori ClearSpar mantengono uniforme, entro tolleranze stringenti, lo spazio sui due lati del diaframma, rendendo piů rigido il sistema. Ciň consente poi al diaframma l’applicazione del preciso valore di tensione meccanica, senza alterare quella caratteristica trasparenza tipica dei prodotti elettrostatici MartinLogan. Vacuum Bonding I componenti dei pannelli XStat - due statori isolati ottenuti da acciaio al carbonio di alta purezza, il diaframma in PET a strato metallico ed i distanziatori ClearSpar - sono uniti in una geometria a sezione cilindrica mediante un adesivo di tipo aerospaziale la cui tenacia supera quella della saldatura. Il nostro trattamento Vacuum Bonding assicura l’uniformitŕ della tensione applicata al diaframma e facilita il rispetto delle tolleranze, estremamente strette, essenziali per la realizzazione di un trasduttore di precisione.  Crossover Vojtko™ Realizzato accuratamente a mano solo con induttori avvolti in aria e coi migliori condensatori in polipropilene, il crossover utilizza la nostra topologia Vojtko per la massima integrazione tra i driver e per una distorsione praticamente nulla. Questo crossover riesce a preservare i dettagli sonori piů delicati anche durante la riproduzione dei passaggi dinamici piů forti, da qualsiasi sorgente. Woofer a bassa distorsione con cono in alluminio  Il cono in alluminio elimina le flessioni e favorisce livelli di distorsione molto bassi, necessari per un adeguato abbinamento dei woofer al pannello elettrostatico.  Alimentazione a bassa tensione, di facile installazione Un alimentatore a bassa tensione elimina il bisogno del tradizionale, grosso cordone di alimentazione IEC.Specifiche Risposta in frequenza:  69 – 22000 Hz ± 3 dB Dispersione orizzontale:  30 gradi Sensibilitŕ: 90 dB/2,83 V/m Impedenza: Nominale 4,0 ohm – minima 2,9 ohm Frequenze crossover: 450 Hz – 2700 Hz Componenti:Trasformatore audio toroidale proprietario, induttori avvolti in aria, condensatori in polipropilene Tweeter:  cm 2,5 con cupola in neodimio Woofer: Due woofer da cm 16,5 con cestello pressofuso, cono in alluminio. Camera asimmetrica non risonante Potenza: 250 w Peso: Kg 17,7  Dimensioni (staffa in basso): 87,9 (L) x 30,4 (H) x 26,1 (P)  Dimensioni (senza posteriore): 87,9 (L) x 23,6 (H) x 30,0 (P)  Dimensioni (senza staffa): 87,9 (L) x 22,7 (H) x 26,1 (P)

CHARIO PHOENIX                      Per offerta Telefonare/ invia  un e-mail

Phoenix  Il sistema Phoenix nato come canale centrale per un sistema multicanale, deve possedere particolari doti di trasparenza nella delicata gamma di frequenze del parlato. Niente di meglio di una Lynx a sviluppo orizzontale, con l'aggiunta di un secondo woofer per rendere omogenea l'emissione in presenza di piů persone che fruiscono del programma A/V. Phoenix puň essere posizionato sia sopra sia sotto il monitor TV.  Il sistema Phoenix nato come canale centrale per un sistema multicanale, deve possedere particolari doti di trasparenza nella delicata gamma di frequenze del parlato. Niente di meglio di una Lynx a sviluppo orizzontale, con l'aggiunta di un secondo woofer per rendere omogenea l'emissione in presenza di piů persone che fruiscono del programma A/V.  Low Frequency Load Vented back firing – TV screen 2π sr  Configuration 2way Symmetrical Cosine Shaped radiation  Drivers 1 Tweeter 38mm soft dome T38 WaveGuide 2 Woofer 130mm Paper Compound  Sensitivity 90 dB SPL normalized to 1m with 2.83Vrms pink noise within IEC 268-13 compliant listening room   Low Frequency Cut Off 80Hz @ -3dB referred to C4 WETS Xover Frequency 1,500Hz  Alignment 4th Order All Pass  Rated Impedance 8Ω  Suggested amplifiers Rated for 120W/8Ω max Average Power  Size 215x490x260mm (HxWxD)  Weight 11kg  Cabinet Finishing Solid walnut or solid cherry and HDF Noce massello

INFINITY kappa CENTER b                                           Per offertaTelefonare/ invia  un e-mail  

Altoparlanti 2x13cm woofer 8 cm  midrange  tweeter  emit-b- risposta  in  frequenza 70hz -45khz 2db  - Frequenza  di taglio 600hz ,4khz- efficenza 88db/2.8v/1m- impedenza 6 ohm- Misure  509x230x270 mm- Potenza  10w-150w - Peso 12.5 kg.

B&W 805 CILIEGIO                                                         Prezzo offerta €. 650,00

SOLO  1  Diffusore  adoperabile  per  esempio  canale  centrale

B&W  SCM1                                                     Per offertaTelefonare/ invia  un e-mail

MISURE 44 x 37 x 16 cm  1  SOLO  1  Diffusore  adoperabile  per  esempio  canale  centrale

YAMAHA YSP-1000                                    Per offertaTelefonare/ invia  un e-mail

YSP 1000 impiega una tecnologia di proiezione digitale del suono che permette di generare un suono a 5 canali con un singolo diffusore. Non sono quindi necessari i diffusori frontali e posteriori, normalmente inevitabili nei sistemi convenzionali. Per decodifiche a 5.1 canali occorre collegare un tradizionale subwoofer attivo. Il collegamento dell'YSP 1000 e' piu' semplice dei sistemi home cinema convenzionali poiche' non sono necessari ulteriori diffusori e di conseguenza cavi di connessione per essi. Il posizionamento inoltre non soffre delle problematiche relative alla stanza, perche' grazie ai diversi parametri impostabili si puo' posizionare il sistema YSP 1000 sopra o sotto il TV e in qualsiasi angolo della stanza. E' possibile inoltre l'installazione a parete o in un qualsiasi mobile. SPM-K1: Supporto da parete opzionale Sono disponibili 2 ingressi video-component e un'uscita monitor, sempre in video-component, con informazioni a display in modo da utilizzare un solo cavo video, e semplificare l'installazione.Di semplice installazione grazie a YEF-ST1.


SUBWOOFERSTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


REL STADIUM ll                                              Per offertaTelefonare/ invia  un e-mail

REL Stadium III on test By Jason Kennedy  Overview: Price: Ł1500 Website: www.rel.net Size: HxWxD - 55.8x59x39cm Weight: 50kg Finishes: Black ash, cherry, light oak, rosenut, walnut Drive unit: 250mm long throw Power: 200 watts REL is a small dedicated company based in Bridgend, south Wales and committed to bass. It could be argued quite easily that REL founder Richard E. Lord put the subwoofer or sub-bass loudspeaker system on the hi-fi map. Before he appeared on the scene the subwoofer was not the kind of thing any self respecting audiophile would consider giving house room to. This may have been because most of the species were sold with satellite loudspeakers or simply because no one had made a serious subwoofer before, one that could enhance rather than muddy the quality of regular speakers.The key feature that makes REL subs so easy to get a good result with is the ability to adjust the roll-off point of the sub so that it marries seamlessly with the stereo speakers. REL subs are not designed to increase the amount of bass produced by a system but to extend the bandwidth of the existing speakers. For a stereo speaker to be able to extend down to the 12Hz (-6dB) claimed for the Stadium III it would have to be as big as a fridge, a big fridge at that. The reason the REL is able to do that with a 65 litre cabinet is that it is actively driven, it has its own 200 watt MOSFET power amp and electronic crossover which means that it can boost the output at very low frequencies. In other words it drives the big ten inch Volt drive unit harder therefore producing more bass energy.Another reason for REL's success is inclusion of both high and low level signal inputs, this means that you can feed the sub exactly the same signal that you send to your speakers via the high level input. The connection is made with a three core cable that hooks up to your amplifier's speaker outputs. There is of course the low or line level input but this is really only appropriate for surround sound processors which have a dedicated LFE (low frequency effects) output. Sound quality To integrate the Stadium III with your speaker traditionally requires that you roll the sub in at the point your speaker rolls off and then set output level to match the speaker. However, I have found that if you set roll off three or four dB higher than the speaker's roll-off and turn the output level down a bit you can get a better result. There are many surprising aspects to the sound of this sub not least being the way that it enhances the high frequency performance of all the speakers I have tried it with. It introduces a sense of open spaciousness that is hard to accredit to an improvement in low frequency extension and power. It must be something to do with the way that bass defines a space but is not an easy phenomenon to explain. Yet it is not in the least bit subtle and gives the REL considerably more appeal than you would expect an extra octave or two in the bass to produce.The bass does of course help matters considerably, it adds a foundation to the sound that gives the rest of the range something to work from, something solid. This seems to apply regardless of the bass content of the music. There is a tendency to think that only your Prodigy and Grace Jones albums will sound a lot better with a decent sub but the Stadium III boosts everything you play. The more familiar and well loved the album the more exciting the result, even albums like Jeff Beck's Wired, which is clearly fantastic yet can sound compressed, takes on a whole new sense of purpose and solidity with this sub.All this is achieved without you thinking wow there's loads of bass, in other words you are not skewing the balance of your system, the main speakers sound the same but better. And if you turn the sub off you don't think where has the bass gone, you think why is the sound small and relatively flat. You can set it up so that it goes boom and everyone knows there's a sub in the room - which can be fun I'll grant you - but for long term musical satisfaction an integrated sound is the way forward, the approach that's going to reveal more of the music and the venue it's played in. leads for installation flexibility  Finished in 30mm MDF in Brittex Blac

MIRAGE 7X/S8                                   Per offertaTelefonare/ invia  un e-mail

PIONEER S-W505       Per offertaTelefonare/ invia  un e-mail


CROSSOVER Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


AM AUDIO  AS3 CROSSOVER                      Per offerta Telefonare/  invia  un e-mail

N° VIE : 2 stereo FREQUENZA DI CROSSOVER (hz) : 37 ÷ 175 RAPPORTO S/N : 110 dB THD : <0,1%PENDENZA DI TAGLIO : 24 dB/oct  INGRESSI : linea 80 KOhm, rca + XLR USCITE : max 14 V50 Ohm CONTROLLI : guadagno, frequenza di taglio regolabile con continuitŕ NOTE : Ingresso Sub 5.1 DIMENSIONI (LxAxP, cm) : 44 x 6,5 x 31 PESO (kg) : 8

GIRADISCHI

Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


NAKAMICHI DRAGON  CT                            Per offerta Telefonare/  e-mail

Drive System Direct-Drive. Motor Quartz PLL DC. Brushless. Slotless. Coreless. High-torque. Platter Die-cast aluminum-alloy. 12.2 inch (310 mm) OD. 3.0 lbs (1.4 kg). Speeds 33.3 RPM. 45.0 RPM. Wow & Flutter < 0.03% WRMS. Noise -78dB DIN-B. Inertia 380 kg/cm2. Weight 44 lbs. 20 kg. Tonearm Static-balance, straight-pipe, oil-damped, exchangeable. Effective length = 9.33 in (237 mm). Effective Weight = 0.55 oz (14 g) w/o cartridge. Overhang = 9/16 in (15 mm). Tracking Error = +2.5 deg to -1.0 deg.  Cartridge Weight = 4~11 grams.- 110 volt necessita trasformatore

Pretty rare, almost non-existent. According to one service engineer, the Dragon CT was much more reliable and better sounding than the bigger TX-1000. I wouldn't know but the goal was basically the same - and the same as that used in the original Dragon cassette recorder, only on a larger scale.Off-center records are a pain and there isn't much one can do if the record is pressed that way ! Well, there is something one can do : search for the real center of the record and adjust the turntable platter to budge so that the off-centered record can be read as if it were not off-centered. No small feat on a cassette recorder (for proper head azimuth) but imagine that on a record player !So, the little arm at the back scans the record groove, decides where the "absolute center" is and the whole turntable assembly then moves accordingly - the cart is no more pushed around left and right and just reads the groove.The main tonearm was sourced from Jelco.UPDATE ! If the TX-1000 was designed by Etsuro Nakamichi (but quite probably built by Micro Seiki), the Dragon CT was "sourced" elsewhere : Nakamichi commissioned Junichi Okumura, then at Fujiya Audio Ltd, to design the CT after the basic goal outlined by Etsuro !This explains the large differences in approach and engineering between the TX and the CT.Fujiya was later in the 1980s absorbed by NEC and units such as the Dragon CT were scrapped from the books. And when NEC shut down its own audio/video activities in the mid 1990s, well, the Dragon CT definitively vanished from the landscape.Thanks to Shinichiro Okumura, son of Junichi, for unveiling this revealing bit of history Two Speed Direct Drive Turntable DescriptionThe Nakamichi Dragon-CT turntable is a 2-speed, integrated turntable system.The Dragon's platter is a massive glass/cast alloy design with a dense rubber mat.The fully adjustable subchassis is high mass and suspended.The Quartz motor is a direct drive type with electronic speed control and switching.The most unusual feature of the Dragon turntable is the additional arm which is used to check for disc eccentricity, and the two-part platter which allows for it's correction.

 

TECHNICS SP 25                                                       Prezzo offerta €.790,00

Technics SP25 Entry level 2-speed studio turntable with pitch control. Based on the SL1200 motor unit. Optional plinth units where available in black (SH-15B3) or simulated rosewood veneer (SH-15B2), both of which where constructed from a heavy, acoustically dead, rubber material. (1979-88)Description The SP-25 turntable offers a similar standard of excellence as the SP-10mkII professional units. Features include total quartz locked pitch control within a 6% range from rated speeds, full cycle detection FG, extremely high torque, a large turntable platter with high moment of inertia, electronic braking system, integral rotor/platter motor construction and highly effective chassis damping.Quartz locked control means virtually perfect speed accuracy. But in most quartz controlled turntables, this accurate speed control circuit is defeated when pitch changes are required.  Now, with the SP-25, pitch is variable continuously (analogically) under total quartz locked control. Specifications Drive method: direct drive Speeds: 33 and 45rpm Motor: quartz locked Pitch control: +-6% Wow and flutter: 0.025% WRMS Rumble: -78dB Start-up time: 0.7s to 33rpm Dimensions: 349 x 85 x 372mm Weight: 4.8kg- - vesione  110 volt  necessita  trasformatore.

TECHNICS SP 25 completo                    Per offertaTelefonare/ invia  un e-mail

TECHNICS SP 25 completo di  base SH-15b2 e  braccio Epa 501H Technics 

Technics SP25 Entry level 2-speed studio turntable with pitch control. Based on the SL1200 motor unit. Optional plinth units where available in black (SH-15B3) or simulated rosewood veneer (SH-15B2), both of which where constructed from a heavy, acoustically dead, rubber material. (1979-88)Description The SP-25 turntable offers a similar standard of excellence as the SP-10mkII professional units. Features include total quartz locked pitch control within a 6% range from rated speeds, full cycle detection FG, extremely high torque, a large turntable platter with high moment of inertia, electronic braking system, integral rotor/platter motor construction and highly effective chassis damping.Quartz locked control means virtually perfect speed accuracy. But in most quartz controlled turntables, this accurate speed control circuit is defeated when pitch changes are required.  Now, with the SP-25, pitch is variable continuously (analogically) under total quartz locked control. Specifications Drive method: direct drive Speeds: 33 and 45rpm Motor: quartz locked Pitch control: +-6% Wow and flutter: 0.025% WRMS Rumble: -78dB Start-up time: 0.7s to 33rpm Dimensions: 349 x 85 x 372mm Weight: 4.8kg- - vesione  110 volt  necessita  trasformatore.

TECHNICS BRACCIO EPA 501H                    Per offertaTelefonare/ invia  un e-mail
 

THORENS td 160b MKII                    Per offertaTelefonare/ invia  un e-mail

Description Despite it's moderate price, this handsome slim line integrated transcription turntable shares many of the advanced engineering features and refinements of the highly sophisticated Thorens TD-125 mark II series. For example, the identical TP-16 tonearm and belt-driven synchronous motor used in the Thorens TD-125 mark II are incorporated in the TD-160C. In addition, it comes complete with a walnut base and dust cover. Here's the traditional quality and precision you have come to expect from Thorens, at a moderate price

THORENS td 318                                Per offertaTelefonare/ invia  un e-mail
Drive method: one step belt drive Motor: low voltage 16-pole synchronous motor Speeds: 33 and 45rpm Speed control: 2-phase generator Platter: 2.7kg, 300mm, zinc alloy, dynamically balanced Wow and flutter: 0.04% Rumble: -70B Tonearm effective length: 232mm Effective mass: 12.5g Overhang: 16.4mm Offset angle: 23 degrees Dimensions: 440 x 350 x 170mm Weight: 10.5kg

TECHNICS  SL1700                                   Per offertaTelefonare/ invia  un e-mail
 
The SL-1700 offers the famous Technics direct drive system with the added convenience of semi-automatic operation. Once the tonearm is manually positioned over the lead in grooves, the automatic mechanism will lower the tonearm onto the record when the lever is flicked, and automatically return it to the arm rest at the completion of play. The unit is then automatically shut off.  This handy feature frees the user from rushing to the turntable at the end of record play and also saves wear on your stylus.  At any time during play, flicking the stop lever will cause the tonearm to automatically lift up and return to the arm rest. Specifications Type: semi-automatic turntable Drive method: direct drive Motor: servo DC motor (mk1), brushless DC motor (mk2) Platter: 330mm (mk1), 332mm 2kg (mk2) Speeds: 33 and 45rpm Wow and flutter: 0.025% WRMS Rumble: -73dB (mk1), -78dB (mk2) Tonearm: universal s-shaped tubular arm Effective length: 230mm Overhang: 15mm Offset angle: 21.5 degrees (mk1), 22 degrees (mk2) Weight: 8.8kg (mk1), 10kg (mk2)

THORENS DT 105                                   Per offertaTelefonare/ invia  un e-mail
Description The Thorens TD 105 semi-automatic, high-fidelity turntable incorporates advanced technical features to afford true state of the art performance. It employs a special Thorens suspension system for the floating chassis and an exclusive Isotrack tonearm with precision bearing assembly and low-mass construction which enables optimum tracking characteristics to be realised with modern pickup cartridges. The TD 105 also employs a velocity sensitive electronic shut-off which raises the tonearm, returns it to it's rest, and stops the motor. The electronic shut-off at the end of a record operates without frictional contact with the tonearm, ensuring precise performance and full protection of the record and pickup stylus. All operating functions are initiated by electronic switching keys which respond to a light touch of the finger. Specifications Drive method: 1 step belt drive Motor: dc motor with 72 pole tacho-generator Speeds: 33 and 45rpm Speed control: electronic Pitch control: +-6% Platter: 300mm, 1.3kg zinc alloy, dynamically balanced Wow and flutter: 0.05%
Rumble: 65dB Tonearm effective length: 222mm Effective mass: 7.5g Overhang: 15.5mm Offset angle: 23 degrees Dimensions: 435 x 125 x 355mm Weight: 5.5kg


PREAMPLIFICATORI Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


BK PRO 10MC   MADE  IN  USA                                Per offerta  Telefonare/  e-mail 

Description : The B&K PRO-10MC is sought after for it's solid Noble potentiometers, great phono stage(MM&MC) and straightforward design. The quality of the headphone section in the PRO-10MC is impressive which beats most "high-end" delicated headphone amplifiers. The B&K PRO-10MC is a "purist" version of the MC-101 which does not use any tone controls. This preamp comes with an outboard power supply to provide the cleanest possible power to unit. Its FET loading design maximizes linearity and minimize noise. Its wide bandwidth assures clear reproduction with all styles of music. Polyproylene film capacitors were used to produce a transparent sound with highly accurate musical timbre. Low noise 1% metal film resistors were used for better sound and greater degree of repeatability. The B&K PRO-10MC preamplifier was well reviewed years ago. It was a Stereophile Class C component, way back in the day. Though not a Class A amplifier, but it certainly made to the list of memorable gear. When played, the sound is clean, detailed and warm which is almost tube like.  Specifications : Moving Coil Sensitivity (at 1kHz).0.09 mVMoving Coil Overload (at 1kHz)17 mVMoving Coil Load ResistanceVariableMoving Coil Load CapacitanceVariable Moving Coil (S/N A Weighted)70 dBMoving Magnet Sensitivity (at 1kHz)0.8 mV Moving Magnet Overload (at 1kHz)225 mVMoving Magnet Load ResistanceVariable Moving Magnet Load Capacitance.Variable Moving Magnet (S/N A Weighted)82 dB THD0.02 % IM Distortion (SMPTE)0.02 % Frequency Response (± 1 dB)1 Hz - 150 kHz High Level Sensitivity45 mV Maximum Output14 V R.M.S. High Level (S/N A Weighted)89 dB Processor Loops 1 Dimensions(w x d x h) 43.5 x 27.5 x 9.5 cm (Main)  12 x 18.5 x 7 cm (Power Supply) Weight7 kg

Threshold T-ZERO  NUOVO!                                       Per offerta  Telefonare/  e-mail  

THRESHOLD  FET NINE/e                                               Per offerta  Telefonare/  e-mail  

Pre stereo in classe A -Risposta in  frequenza: 1.5-125.000-distorsione armonica:0,02% a 3v di uscita-distorsione diintermodulazione:0,02% a 3v di uscita-Sens/imp ingresso phono:-guadagno selezionabile 40o 60dB imp.variabileda 22 a 47.000 ohm-Sens/imp. ingressi aux-linea:25.000 ohm+20db-RAPPORTO S/N:-80dB a 1mv ingresso,-100dBingressi basso guadagno-Dimensioni 48x8x16.5cm -Peso 2kg -note: alimentazione separata 

NUFORCE P8    ex demo                                              Offerta     €.940,00

NuForce developed its prescient preamplifier technology from the ground up to reassess and redefine faithful music reproduction. The firstimpressions of listening to NuForce preamplifiersare those of pristine clarity, natural tonality,expansive imaging, and realistic proportions of themusicians and their instruments. Bass notes arewell defined and articulate, with addictive rhythmand drive. P-8 is NuForce's entry level high-endpre-amplifier.Specifications• Audio inputs: 3 sets of RCA inputs and a 3.5mm stereo input jack(for digital media player, PC sound devices).• Audio outputs: 1 set of RCA,1 set of balanced XLR,and a 3.5mm stereo headphone output withcross-feeding to create a natural soundstage.• Remote input selection and volume control with memory (last selection,volume level)• Mute and Sleep functions• Digitally-controlled switched attenuator. Volume Range: +30dB to –70dBwith 0.5dB steps• Dynamic Range: > 100dB• Input Impedance: 4K ohm• Output Impedance: 40 ohm• THD+N at 1kHz: <0.01%, typically 0.003-0.005%• S/N Ratio: > 85dB• Frequency Response:at 20-20kHz = +0dB/-0.2dBat 20-170kHz = +0db/-3dB• Maximum output : 8V RMS• Crosstalk: –130dBFS• Dimensions: 1.75”H x 8.5”W x 16”D• Weight: 6 lbs• 100W SMPS with PFC (Power Factor Correction)• Power Requirements: 90-240VAC, auto select.

NAD    1000i    EX DEMO                           Per offerta  Telefonare/  e-mail

APPARECCHIO DAL SUONO HI END MORBIDO E PRECISO STESSA TIMBRICA DEL FAMOSO NAD 3020 QUESTO PREAMPLIFICATORE DISPONE ANCHE DI UN OTTIMO STADIO PRE-PHONO CON VARIAZIONE DEL TIPO DI TESTINA MC E MM ABBINABILE A QUALSIASI FINALE DI POTENZA NATURALMENTE CON UN FINALE NAD SI ACCOPIA MEGLIO REGOLAZIONI BASS – TREBLE – BASS EQ-LOUDNESS INGRESSI: PHONO-CD-TUNER-TAPE1-TAPE2-OUTPUT1 E OUTPUT2 POSSIBILITA’ DI COLLEGARE 2 FINALI DI POTENZA

YARLAND P7                            Per offerta Telefonare/ invia  un e-mail

NAD    114                                      Per offerta  Telefonare/  e-mail

•6 line inputs incl. 2 Tape in/outputs with dubbing facility •Switchable MM and MC phono input •2 line outputs•Gold plated phono and CD input sockets•Gold plated output sockets•Independent headphone amplifier •Tone defeat switch Based upon the highly praised NAD106, the model 114 is the latest in the range of NAD high quality /low price pre-amplifiers.Following in NAD's usual design brief of ‘sound quality first’ť the 114 utilises reliable, uncomplicated circuit topology which allows for investment in high specification, close tolerance components such as a large, low noise transformer, metal film resistors, polypropylene capacitors and a precision volume control.  A carefully re-designed PCB layout contributes further to a noise and distortion free performance. The input selectors are operated by push rods and are located as closely as possible to the input sockets to minimise cross talk. Also featuring Gold plated RCA jacks (to give reliable signal transfer), and two tape loops to offer flexibility for tape dubbing in either direction (or the inclusion of a signal processor). Any input may be monitored whilst recording. A gold plated 1/4’ť jack socket permits most non-electrostatic headphones to be connected to the dedicated headphone amplifier.  Still in demand by music lovers (but often disregarded by other manufacturers) is a good quality phono stage. The phono stage in the 114 is a fine example of what can be achieved at a reasonable price. The phono stage is switchable to allow moving coil or moving magnet cartridges to be used. Metal film resistors, polypropylene capacitors and seven discrete transistors provide extremely low noise performance, precise equalisation and a dynamic range of 105dB.

TECHNICS SU-800UM2                             Per offerta  Telefonare/  e-mail    

SANSUI BAF1                          Per offerta Telefonare/ invia  un e-mail

QUAD                                                      Prezzo offerta    €.590,00


AMPLIFICATORI FINALITelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


 

KRELL FPB600                                         Per offertaTelefonare/ invia  un e-mail

Description: Two-channel, solid-state power amplifier with Sustained Plateau Biasing output stages. Power output: 600Wpc into 8 ohms (27.8dBW), 1200W into 4 ohms (27.8dBW). Power bandwidth (-3dB): 4Hz-20kHz. Output impedance: 0.03 ohms. Input sensitivity: 4.3V RMS (balanced) for rated output. Input impedance: 85k ohms.  Dimensions: 19" W by 10" H by 25.5" D. Shipping weight: 182 lbs.

JEFF ROLAND MODEL 112                       Per offertaTelefonare/ invia  un e-mail

Jeff Rowland | Model 112  Amplificatori Finali Stereo Serie Amplifiers   Finale di potenza stereo da 150 W + 150W RMS su 8 ohm (250 W RMS/4 ohm). Ingressi sbilanciati e bilanciati, guadagno selezionabile, chassis interamente in alluminio.
 

MBL 8006 B                                             Per offertaTelefonare/ invia  un e-mail

Elevate the performance from your system to a whole new level. The 8006B is state-of-the-art all the way. Offering output stage that gives the sound clarity highest priority. An ingenious circuitry design ensures outstanding dynamics and performance. The 8006B sounds so great, it compares to the world's most expensive reference solid-state amps. The unit has been equipped with both "Balanced" and "RCA" inputs on back panel. Channels 2 (Stereo)  RMS Power (Watts Per Channel) 120 x 2 @ 8, 182 x 2 @ 4  Circuit Type Class A  I/O Interfaces XLR, RCA
 

MARK LEVINSON n° 333                     Per offertaTelefonare/ invia  un e-mail

 Nş333 Rated power output: 300 w/ch continuous rms power @ 8Ω 600 w/ch continuous rms power @ 4Ω 1200 w/ch continuous rms power @ 2Ω all above power ratings from 20 Hz–20kHz at <0.5% THD _ Frequency response: within 0.1 dB from 20 Hz to 20 kHz _ Signal to Noise ratio (main outputs): better than –80 dB (ref. 1 w) _ Input impedance: 100kΩ (balanced) 50kΩ (single-ended) _ Voltage gain: 26.8 dB _ Input sensitivity (2.83V output): 130 mV (all models) _ Input sensitivity (full output): 2.25V for Nş333 1.80V for Nş332 1.30V for Nş331 _ Power consumption (Nş333): 350W (±5%) at idle, 200W (±5%) in standby _ Mains voltage: determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user _ Overall dimensions: See “Dimensions” _ Nş333 Shipping weight: 150 lbs. (68.2kg) each _ Connector complement: four custom binding posts per channel one 3-pin XLR balanced input connector per channel one RCA input connector per channel two 1⁄8" mini-jacks for remote turn-on two Mark Levinson communications ports one captive high current AC mains cord (Nş333 only), or one IEC-standard high current AC receptacle (Nş332, Nş331) _ Output impedance: less than 0.05Ω from 20–20,000 Hz _ Damping factor: greater than 800, 20–20,000 Hz @ 8Ω peso: 70kg

MARK LEVINSON n° 336                     Per offertaTelefonare/ invia  un e-mail

Mark Levinson N°336 Dual Monaural Power Amplifier, Madrigal Audio Laboratories, Designer: Madrigal design team. Power rating: 350 watts @8 ohms; 1400 watts @2 ohms. Frequency response: 20 to 20,000  Hz ± 0.1 dB. Damping factor: >800 (20-20,000 Hz @8 ohms). Input impedance: 100 K (balanced), 50 K (single-ended). Input sensitivity: 2.42 V. Output impedance: <0.05 ohms (20- 20,000 Hz @8 ohms). Connections: four custom binding posts per channel for biaming; one 3-pin XLR balanced connector/channel; one RCA input connector/channel. two-4 inch mini-jacks for remote turn-on; two Mark Levinson communication ports; two PHAST communication ports. Non-detachable AC cord. Dimensions: 171⁄2" x 9" x 19" (w x h x d). Shipping weight: 150 lbs 

MARK LEVINSON N°436                     Per offertaTelefonare/ invia  un e-mail

Description: Solid-state monoblock power amplifier with one pair Madrigal speaker binding posts, one 3-pin XLR balanced input, two 1/8" minijacks for remote turn-on, one RS-232 port on RJ-11, two Mark Levinson communication ports on RJ-45, and two PHAST communications ports on RJ-45. Rated power output (20Hz-20kHz, <0.3%. THD, FTC): 350Wpc into 8 ohms (25.4dBW), 700W minimum continuous into 4 ohms (25.4dBW), 1400W minimum continuous RMS power at 2 ohms (25.4dBW). Frequency response: 20Hz-20kHz, ±0.2dB. Output impedance: ±0.05 ohm, 20Hz-20kHz. S/N Ratio: better than -89dB (ref. 2.83V). Damping factor: >800, 20Hz-20kHz into 8 ohms. Power consumption: 100W in standby, 180W at idle. Current draw at rated output at 120V: 8.5A (350W into 8 ohms), 14.6A (700W into 4 ohms), 25.6A (1400W into 2 ohms). Dimensions: 17.75" (455mm) W by 7.65" (194mm) H by 20.2" (518mm) D. Weight: 85 lbs (38.6kg) net, 95 lbs (43.2kg) shipping. serial number :1028

.

                                 

 

Denon POA-A1HD  

Amplificatore di potenza 10 multicanale. 150W su 8Ω x 10 canali. Finitura Premium Silver. Ognuno dei 10 canali realizzato con costruzione indipendente one-block/ mono-block. Trasformatore separato per ogni canale, possibilitŕ di configurazione a ponte per funzionare come amplificatore a 5 canali ad elevata potenza (500W x 5 canali/4 ohm). Tutti i canali amplificati possono essere assegnati. 3 Vu Meter di potenza analogici per monitorare visivamente i canali selezionati. Ingressi XLR e RCA. Connettori dei diffusori di grande sezione, placcati oro. Finitura Premium Silver.Misure  L 434x H 297 x P 530

A fitting companion to the reference AVP-A1HDCI Controller, the POA-A1HDCI multi-channel power amplifier sets the standard for power and precision, with unparalleled configuration options. Each of the 10 amplifier channels features a discrete power amplifier assembly to eliminate interference between channels, and each is equipped with a dedicated DC power supply that ensures optimum fidelity without interference from other channels. High current DC rectifiers and companion high current filter/storage capacitors ensure stable performance with low impedance (4 ohms) speaker loads, even in bridged mode. Each amplifier channel also features A/B speaker outputs that allows tremendous flexibility with sophisticated multi-zone installations in addition to bi-amping capability, along with our exclusive Control Link connectivity for seamless configuration and switching via the A/V controller. The rugged chassis features direct mechanical grounding that eliminates microphonically-induced distortions, along with extensive shielding to prevent mutual interference between individual amplifier channels and low and high power circuits. THX Ultra2 certified 300W x 10ch (4 ohm) power amplifier Independent Mono Block construction Sturdy power pack with 8 transformers, 15 separate current supplies, 10 HighCurrent rectifier diodes (250A) as well as capacitors of 200.000 µF each Bridge mode capable of 5 x 500W (4 ohms) XLR and RCA inputs for each channel A/B speaker circuit for each channel Robust Gold-plated Brass binding posts Three VU meters for monitoring power output (assignable) RS-232C connection for integration with control systems Control link for use with AVP-A1HD Available in Premium Silver

NAKAMICHI PA 5                             Per offerta Telefonare/ invia  un e-mail

Potenza2x100 W,  Dimensioni : 435x135x412, Peso 22 Kg

100wpc into 8ohms,160wpc into 4ohmsDynamic power 150wpc into 8ohms, 270wpc into 4ohms Dynamic Headroom 1.7db into 4ohms, 2.2db into 4ohms Output current capability 12 amps continuous, 35 amps peak per channel Power supply; 450 watt toroidal transformer. 700 Watt toroidal transformer, dual rectifiers 17" wide x 15" deep x 6" tall

THRESHOLD S300                      Per offerta Telefonare/ invia  un e-mail

Non-inverting complementary symmetry power amplifier  utilizing  N-channel Jfets in the front-end signal path and Threshold's propietary Statis output consisting  of a binary  stage employng a voltage  amplifier  section operated  in pure classe A  and a current  bootstrap section  operated  in class A/B.Fully  discrete components are used throughout .No feedback loop is employed around the aggregate front-end and output power stage.Rated output power:2 x 150 watt @ 8 ohm-Both channel driven at more than 0.1%distortion in to 8Ohms of resistive or reactive inpedance.Bandwidth response :hallpower (-3db) points st 7Hz and 100Khz. Slave rate:50 volts per microsecond. Output current capability 10 continuous, 80 peak amperes per channel-Power supply:700 watt torodial trasformer 60,000 microFarads capacitance -Imput impedance 75,000Ohms- ouptput impedance : less than 0.1 OHMS 20 hz trough 20Khz- gain factor +26.6 -Noise greater -100db  cl ass A /AB -30KG

QUAD II                         Per offerta Telefonare/ invia  un e-mail

Description The Quad II Forty power amplifier is a direct descendant of the legendary Quad II amplifier designed by Peter Walker, founder of Quad and one of the guiding lights of early Hi-Fi reproduction. Like the Quad II, the II Forty uses the uniquely simple and timeless circuit topology developed by Walker. The modern listener demands a higher power output than the 15W of the original Quad II. The new amplifier uses larger output valves and a more robust power supply and the input valves have been upgraded to military grade devices. Whilst it retains the layout and styling of the Quad II, the chassis size has been increased to take the substantially larger components including mains and output transformers. Specifications Power output: 40W into 8Ω (mono) Frequency response: 10Hz to 30kHz Total harmonic distortion: 0.3%Damping factor: 20 Input sensitivity: 1V Signal to noise ratio: 80dB Speaker load impedance: 4Ω to 8Ω Valve complement: 2 x 6SH7, 2 x KT88, 1 x 5U4G

YARLAND                        Per offerta Telefonare/ invia  un e-mail

    

AUDIOANALOGUE DONIZETTI           Per offerta Telefonare/ invia  un e-mail

        

SANSUI BAF1                                Per offerta Telefonare/ invia  un e-mail

Specifications  Power output: 110 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 600kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 125dB Speaker load impedance: 8Ω (minimum) Dimensions: 430 x 187 x 430mm Weight: 20.4kg

      

NAD 214                                    Per offerta Telefonare/ invia  un e-mail

Specifications Power output: 80 watts per channel into 8Ω (stereo), 240W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Damping factor: 200 Input sensitivity: 0.9V Signal to noise ratio: 115dB Speaker load impedance: 4Ω (minimum) Dimensions: 435 x 128 x 370mm Weight: 12.5kg

      

TECHNICS  A800 MKII                                               Per offerta  Telefonare/  e-mail  

       

MUSICAL  FIDELITY  X-A50                                 Per offerta  Telefonare/  e-mail  
Power output: 50W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.01% Gain: 17 dB Signal to noise ratio: 114dB Dimensions: 110 x 110 x 330mm Weight: 3.3kg

                       

HARMAN KARDON  HK775                                         Per offerta  Telefonare/  e-mail  

Power output: 130W into 8Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.03% Damping factor: 100 Input sensitivity: 1.2V Signal to noise ratio: 123dB Dimensions: 385 x 72.5 x 320mm Weight: 10.1kg
 

        

LINN   LK85                                    Per offerta Telefonare/ invia  un e-mail

       

DENON POA T-3                              Per offerta Telefonare/ invia  un e-mail

Specifications: 120 Watt per channel into 8 Ohms RMS;  0.008% THD at rated output;  FR. 1 Hz - 100 KHz +0dB -3 dB;  Input sensitivity 1.1V;  Input Impedance 47 KOhms;  Signal to noise ratio 110 dB;  Power requirements 220 - 230 V 50 Hz;  Please note the voltage is for UK / EU Only.  Weight - 12.3 kg.

          

DENON POA 1500                                 Per offerta Telefonare/ invia  un e-mail

2 beleuchtete analoge VU-Leistungsmeter  getrennt regelbare Eingangs-Level (hinten)  2 Paar vergoldete Cinch-Eingangs-Buchsen 2ter Cinch-Eingang mit High-Cut-Filter Subsonic-Filter-schaltbar 3 LED-Anzeigelämpchen für den Einschalt-Selbstkontroll-Prüfzyklus 2 schaltbare LS-Ausgänge mit LED-Anzeige, intern über Relais geschaltet Ausgangsleistung: 2 x 150 Watt sinus an 8 Ohm, 20-20.000 Hz  2 x 240 Watt sinus an 4 Ohm  Frequenzgang: 1 Hz. bis 300 kHz  Anstiegsgeschwindigkeit: 400 Volt / µS (!!)  Geräuschspannungsabstand: 123 dB  misure: 470 x 168 x 418 mm  peso: 20 kg

MARANTZ MA500 EX DEMO                           Per offertaTelefonare/ invia  un e-mail

Marantz MA500 125w Mono Power Amplifier Each amplifier delivers 125 watts RMS @ 8 ohms (20 Hz - 20 kHz 0.05% THD) and 180 watts RMS @ 4 ohms (20 Hz - 20 kHz 0.09% THD). The MA500 is a very versatile amplifier because of its small size and high output capability. Inside is housed a very reasonably sized transformer, two 10,000uF Elna audio grade capacitors, and 4 heavy duty output transistors. If you get a 5th MA500 you're looking at 100,000uF total capacitance!Another great feature of these compact wonders is their capability to be paired for bridging (please observe the diagram below). Bridged the power output can reach 360 watts @ 8 ohms continuous power! Marantz also claims a dynamic peak of 500 watts @ 8 ohms and 600 watts at 4 ohms when the amplifiers are bridged.  Dimensions - W/H/D 3 5⁄16” x 5 1⁄2” x 17 3⁄4”  Weight - 14 pounds each.

        

DENON POA F100                                   Per offertaTelefonare/ invia  un e-mail

Amplificatore finale di potenza a 3 canali. 25 W x 3 canali su 8 ohm (canale centrale e canali surround). Ideale in abbinamento al AVRF100 per creare un sistema multicanale A/V.Stadi finali separati a componenti discreti. Accensione e spegnimento controllati dal telecomando in dotazione all'AVR-F100.

Denon-Design-Endstufe POA-100 Dreikanal.Äußerlich sehr gut erhalten. Technisch i.O. Aus Ausstellung gekauft und von mir seither fast unbenutzt. Reduziere jetzt meine Sammlung. Design: silber. Leistungseigenschaften: - Anzahl der Signal-Kanäle: 3 - Mitte:25 W Sinusleistung - Hinten:25 W Sinusleistung, pro Kanal - Sinusleistung (Mitte) gemessen an 6 Ohm - Sinusleistung (Hinten) gemessen an 6 Ohm - Frequenzgang-Untergrenze, Line: 20 Hz - Frequenzgang-Obergrenze, Line: 50000 Hz - bei max. Abweichung, Line von + 1 dB - bei max. Abweichung, Line von - 3 dB - Eingangsempfindl., normal/direkt: 0,435 V - Eingangsimpedanz: 47 KOhm Geräuschspannungsabstand: 90 dB.Anschlüsse: - Cinch-IN, gesamt: 3. Konstruktionsmerkmale:diskreterVerstärkeraufbau.Leistungsaufnahme/Spannungsversorgung: - Leistungsaufnahme, Betrieb: 72 W.GehäuseEigenschaften: - Breite: 27 cm - Höhe: 8,4 cm - Tiefe: 25 cm- Gewicht: 3,9 kg.

         

YAMAHA A 100                                             Per offerta  Telefonare/  e-mail

Specifications Power output: 50 watts per channel into 8Ω (stereo), 100W into 16Ω (mono) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.2% Damping factor: 70 Gain: 38.2 dB Input sensitivity: 0.245V Signal to noise ratio: 105dB Speaker load impedance: 8Ω to 16Ω Dimensions: 220 x 96 x 296mm Weight: 4.6kg


AMPLIFICATORI INTEGRATI Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


LINEAR ACUSTIC LA TUBE 1                                       Per offerta  Telefonare/  e-mail

Nennleistung/Rated power Triodenmodus/"Triode" mode of operation: Ultralinearmodus/"Ultra-linear" mode of operation: 2x45 W an 4 oder 8 Ω/ 2x45 W at 4Ω or 8Ω 2x80 W an 4 oder 8 Ω/ 2x80 W at 4Ω or 8Ω Eingangsempfindlichkeit für Nennleistung/ Input sensitivity for rated power Cinch: 450 mV XLR: 850 mV Eingangsimpedanz/ Input impedance Cinch: 7 kΩ XLR: 26 kΩ Ausgangsimpedanz/ Output impedance 0.17 Ω (am 4Ω-Anschluß/at the 4Ω-terminal) 0.29 Ω (am 8Ω-Anschluß/at the 8Ω terminal) Signal/Rauschabstand bezogen auf Vollaussteuerung/ Signal/noise ratio(SNR) rel. full modulation better than 98 dB (A) Klirrfaktor/ Distortion factor (THD+N) 1 kHz/10 W 4Ω-Anschluß/4Ω-terminal: 0.03% 8Ω-Anschluß/ 8Ω-terminal: 0.07% Frequenzgang/ Frequency response 20 Hz-20 kHz  Cinch: + 0.1/-1.2 dB XLR: +0.1/-0.4 dB Garantie/ Guarantee 3 Jahre inkl. Röhren/ 3 years including tubes Gewicht/ Weight 45 kg Abmessungen/ Dimensions HxBxT/ H x W x D: 230 mm x 450 mm x 446 mm

           

TECHNICS SU-MA10                                  Per offerta  Telefonare/  e-mail

Massive integrated audio amplifier with built-in 1-bit MASH digirtal stages and monitoring loop - plus bombastic reservoirs of caps, heatsinks and transformers. Each X-Pro capacitor is in fact two-in-one: one for positive phase and one for negative. Besides this, these beer cans are copper topped and plotted into composite materials for less vibrations and even less magnetic leakage. The two 300VA transformers are of the EI kind and wound with OFC copper. The dual-mono structure is followed through the back with the input terminals centered vertically and the output posts being, previsibly, spread over the left and right sections.The MASH d/a section, running the entire depth near the bottom plate, is typical of MASH sections: multi-stage noise shaping with several PLL loops to output every digital bit in good order and amplitude. This MASH section is connected directly to the power output section. Added to it is "Class AA": stabilizing input and output voltages for a 140dB digital s/n ratio...Part of the penultimate high-end Technics full lineup, at 107,000Ą, loaded as it was, the 25kg SU-MA10 was quite a bargain. It still is but it's pretty rare anywhere. Specifications Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 110 Input sensitivity: 0.25mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MC), 79dB (MM), 92dB (line) Channel separation: 55dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 430 x 186 x 433mm Weight: 25kg

ARCAM  ALPHA9                                             Per offerta  Telefonare/  e-mail

Description The Arcam Alpha 9 integrated amplifier has 6 line level inputs and an optional phono input Specifications Power output: 70 watts per channel into 8Ω (stereo) Total harmonic distortion: 0.02% Input sensitivity: 0.26mV (MC), 2.6mV (MM), 160mV (line) Signal to noise ratio: 73dB (MC), 79dB (MM), 90dB (line) Output: 0.8V (Pre out) Dimensions: 430 x 330 x 110m Weight: 6.1kg

ARCAM  ALPHA7                                             Per offerta  Telefonare/  e-mail

           

NAKAMICHI amplifirer 2                                           Prezzo   €.  450,00

Merkmale / Funktionen / Ausstattung: Harmonic Time Alignment Prinzip - Minimum an Verzerrung für bessere Tonqualität  Hochpegelstufe mit diskreten Bauelementen  großzügig dimensionierte Leistungstrafos für enorme Stromkapazität  niederohmige Aussteuerung für besseren Klang  Netzteil in "Multi-Regulated"-Technik - separate Transformatorwicklungen "Isolated Group"-Prinzip - Referenzpotential bleibt immer konstant, was stabiles Arbeiten aller Schaltungen garantiert  Phono: MM/MC - Schalter hinten  Tone Schalter- der Klang kann mit den entsprechenden Reglern eingestellt werden  Systemsteuerung RI - zur Steuerung weiteren RI- fähigen Nakamichi-Geräte  Muting Funktion  Bass, Treble, Balance Regler  Rec Selector  Input Selector: Tape2, Tape1, Phono, Tuner, CD, AUX  Lautsprecherwahlschalter: A/B, A+B  Anschlüsse s. Bilder  Technische Daten: (alle Angaben ohne Gewähr) DIN Ausgangsleistung an 4 Ohm: 2 x 80 W  RMS Ausgangsleistung an 8 Ohm: 2 x 50 W  Musikleistung an 2 /4 Ohm: 2 x 140 W / 2 x 90 W  Gesamtklirrfaktor: 0,01%  Aufnahmeleistung: 370 W  Abmessungen ca. (B x H x T): 430 x 125 x 360 mm  Gewicht: ca. 12,5 kg

         

PROTON AM 452                                                     Prezzo   €.  390,00 

PROTON AM452 AMPLIFICATORE INTEGRATO CON PRE-OUT 25 WATT X 2 SU 8 OHM 5 INGRESSI RCA (DI CUI 1 INGRESSO PHONO) 2 USCITE RCA

             

PIONEER A717 mark ll                                            Prezzo  €.  390,00

Specifications Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 150kHz Total harmonic distortion: 0.003% Damping factor: 70 Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 77dB (MC), 95dB (MM), 108dB (line) Output: 150mV (line) Dimensions: 420 x 435 x 162mm Weight: 19kg

NAD    306                                                          Prezzo  €.  300,00  
SpecificationsPower output: 50 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.03%Damping factor: 100 Input sensitivity: 0.12mV (MC), 2.6mV (MM), 170mV (line) Signal to noise ratio: 78dB (MC), 80dB (MM), 97dB (line Dimensions: 420 x 95 x 350mm Weight: 8.9kg

NAD    3020                                   Per offertaTelefonare/ invia  un e-mail
The NAD 3020 can be used as the heart of an elaborate audiophile sound system. For example, the pre-amp out jacks may be connected via a stereo patch cord to any high quality separate power amplifier.To use a separate high power amplifier for your main stereo speakers while continuing to use the nad 3020'S inbuilt power amp for headphones or extension speakers, simply install Y adaptors to split the signal from the pre-amp out jacks. The pre-amp stage is capable of driving several power amplifiers in parallel, or the long signal cables required to connect to power amplifiers located near the speakers, or to powered speakers. Specifications Power output: 20 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.02% Damping factor: 55 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 75dB (MM), 110dB (line) Dimensions: 420 x 96 x 240mm Weight: 5.26kg
 

           

MARANTZ 1150                               Per offertaTelefonare/ invia  un e-mail

Power output: 75 watts per channel into 8Ω (stereo) Frequency response: 15Hz to 50kHz Total harmonic distortion: 0.1% Input sensitivity: 1.8mV (mic), 1.8mV (MM), 180mV (line) Signal to noise ratio: 78dB (MM), 88dB (line) Output: 0.775mV (line) Speaker load impedance: 8Ω (minimum) Dimensions: 376 x 144 x 301mm Weight: 14.8kg
 

          

MARANTZ   PM 6010 OSE KI SIGNATURE                             Prezzo   €.  400,00
Specifications RMS power into 8/4 ohms  50/ 70W    DIN power into 8/4 ohms  52/ 72W  IHF dynamic power into 8/4 ohms  60/ 80W  Linear Drive Power Supply  Total Harmonic Distortion  0.008%  Damping factor  100 CCNE Signal-to-noise CD/Phono (MM/MC) 96/ 85 dB Frequency range 10 - 60k Hz Power Transformer EI Channel separation (1kHz/10kHz) >90/ 85 dB Cabinet dimensions (W x H x D)  440 x 138 x 343 mm  HDAM  Copper Weight 6.7 kg Symmetric PCB Layout Chassis Metal High Grade Audio Components Customized Components System Block Shielding  Metal BTL Possibility  Treble, Bass Balance Loudness Source Direct  Separate Solid Heatsinks  Speaker A/B Record Selector Tape Monitor  Temperature Gauge  Standby mode Gold Plated Cinch IN/OUTPUTS Audio Inputs  6  Phono Input  MM  Audio Outputs  2 Balanced I/O External Control In  Processor I/O  Pre-out / Main in  D-Bus I/O  Speaker Terminal  Screw  AC Outlets SPECIFICATIONS  Power Output (8/4 Ohm RMS)  50 / 70 Watts  Frequency Range  10Hz-50kHz (+0, -1 dB)  Total Harmonic Distortion(THD)  0,008% Bridged Power Output  Damping Factor  100  Input Sensitivity MM/MC  2.5mV / - mV   Input Sensitivity High Level  150 mV  Input Sensitivity Balanced  -- Signal to Noise MM/MC  85 dB / - dB  Signal to Noise High Level  97 dB  Channel Separation  1kHz / 10kHz > 90 dB / 85 dB  Headphone Out  GENERAL  Color  Black / Gold  Front Panel  Metal  Remote Control  RC8000PM, System (NOT SUPPLIED) Power Consumption  --  Detachable Power Cable  Dimensions WxHxD (mm)  440x138x338   Weight   6,7 Kg

 

MARANTZ   PM7000                                                Prezzo  €.  350,00  
Power output: 95 watts per channel into 8Ω (stereo)Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.03% Damping factor: 130 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 85dB (MM), 109dB (line) Channel separation: 70dB (line) Dimensions: 440 x 159 x 370.5mm Weight: 12.3kg
 

 

MARANTZ   PM610                                                Prezzo   €.  280,00
output: 50 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 70kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 87dB (MM), 97dB (line) Dimensions: 440 x 138 x 338mm Weight: 6.7kg

MARANTZ   PM53                                               Prezzo     €.  200,00
Specifications Power output: 55 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 70kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 86dB (MM), 102dB (line) Channel separation: 85dB (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 420 x 118 x 300mm Weight: 6.2kg
 

 

 

TECHNICS SU-X911                                              Prezzo    €. 220,00
Power output: 40 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 1% Damping factor: 30 Input sensitivity: 3mV (MM), 200mV (line) Signal to noise ratio: 79dB (MM), 83dB (line) Channel separation: 55dB (line) Output: 200mV (line) Speaker load impedance: 8Ω to 16Ω  Dimensions: 360 x 106 x 304mm Weight: 5.3kg Finish: black
 

YAMAHA  AX490                                                 Prezzo  €.  250,00

Power output: 85 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.008%Damping factor: 240 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 88dB (MM),                      110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 435 x 146 x 386mm Weight: 9.2kg Accessories: remote control
 

YAMAHA  AX390                                                 Prezzo   €.  190,00

Specifications Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.04% Damping factor: 100 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 82dB (MM), 102dB (line) Channel separation: 65dB (MM), 60dB (line) Output: 150mV (line) Dimensions: 435 x 146 x 309mm Weight: 7.3kg


COMPACT DISC   Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


           

JADIS  J1 Drive                                   Per offertaTelefonare/ invia  un e-mail

           

Mark Levinson Cd  N°37                               Per offertaTelefonare/ invia  un e-mail

No.37 Description: CD transport with four digital outputs: AES/EBU on XLR, S/PDIF on BNC, S/PDIF on RCA, ST optical.  Dimensions: 15.75" W by 3.76" H by 14.3" D. Weight: 34 lbs (shipping).

            

MARANTZ 11 S1                               Per offertaTelefonare/ invia  un e-mail

Riproduzione SACD (stereo) e CD, Sistema di filtraggio DSP esclusivo Marantz derivato dal modello SA-7S1, Meccanica di nuova progettazione realizzata in metallo, Invertitore digitale di fase, Ingresso per clock esterno, Trasformatore toroidale, Telaio rivestito in rame, Filtro DC commutabile e Noise Shaper, Pannello superiore da 5mm di spessore, Uscite XLR e sbilanciate, Telecomando in alluminio

The SA-11S1 Super Audio CD player launches new heights in stunning audio excellence. All sections of this integrated player are in perfect harmony and built in a fully symmetric layout. The SA-11S1 will give you the most detailed and dynamic reproduction ever heard, ensured by our highly advanced digital filter techniques, which use Marantz’s own filter characteristics. Because of this the SA-11S1 SA-CD player has a unsurpassed rhythmic intensity, quality of dynamics and pace more usually associated with the recording studio. Playback of SA-CD has never been exhilarating, even Audio CD will sound as never heard before making it a must for every audiophile and true music lovers. NEW SA-CD playback Marantz exclusive digital filters New high grade Toroidal transformer New heavy aluminum top cover for extra stability Current Feedback HDAM-SA2 Digital phase inverter External clock input High grade balanced XLR and unbalanced RCA terminals

              

COPLAND CDA288                               Per offertaTelefonare/ invia  un e-mail

Internally, the CDA 288 is anything but understated. Designer Morten Simonsen has skillfully engineered a very sophisticated digital design. The Copland uses the TEAC VRDS mechanism, and I would have to agree that it deserves its reputation for being reliable and quiet. The mechanism is solidly mounted within the case and has its own secondary transformer windings on the CDA 288’s digital power transformer. The transport is flanked on the left by the power supplies and by the TEAC control and servo board on the right. The heart of this CD player is the very well laid-out digital decoder that lies behind the transport. Morten Simonsen evaluated six different digital oversampling filters before implementing the Pacific Microsonics PMD-100 digital filter in the CDA 288. The CDA 288 also uses two premium "K"-grade Burr-Brown PCM63 20-bit DACs per channel in a time-averaging configuration that Copland found sonically superior. The CDA 288’s analog electronics (I/V-conversion, reconstruction filter, and output stage) are constructed with discrete semiconductors in a class-A topology, and a second-order, linear-phase Bessel analog filter is also used.

MARANTZ cd 17                                 Per offertaTelefonare/ invia  un e-mail


Specifications for the MARANTZ CD-17  CD Player Frequency Rang 5Hz-20 kHz (±2dB) Dynamic Range >98dB S/N Ratio  >103dB Channel Separation >100 dB Total Harmonic Distortion 0.0015% Dimensions Width 458mm  Height 86mm Depth 313mm Weight 7.8kg

 

       

DENON DCD-DS10II                          Per offerta Telefonare/ invia  un e-mail

        

PROTON AC 423                                                Prezzo offerta    €.290,00

        

MARANTZ  CD 75II                              cod.0120 Prezzo offerta €. 160,00

       

NAKAMICHI MB4                                                  Prezzo offerta €.450,00

        

NAKAMICHI OMS 3                                             Prezzo offerta €.300,00

       

NAKAMICHI OMS 5                                            Prezzo offerta €. 500,00

435x110x320mm  Peso: 7Kg
       

NAKAMICHI OMS7                                         Prezzo offerta €. 750,00

       

PIONEER   PD-S801G                         Per offertaTelefonare/ invia  un e-mail

       

DENON DCD695                                                      Prezzo offerta €.200,00

MARANTZ CD 5000                         Per offerta Telefonare/ invia  un e-mail

TEAC CDP1100                                              Prezzo offerta €. 100,00

DENON UDC-F07                                          Prezzo offerta €. 150,00

TECHNICS SL-E10                                      Prezzo offerta  €.190,00


CONVERTITORI DAC  Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


 

THRESHOLD  DAC 1E                    Per offertaTelefonare/ invia  un e-mail

Description  High-performance processor for converting a digital audio input stream  To an analog output signal at fixed line level. Operating format is an ultra linear 1 bit system performing @ 24 bit equivalent static linearity in a dual parallel balanced differential configuration. Computer optimized passive filtration maintains phase linearity to 80 kHz. Proprietary "jitter" reduction circuitry assures extreme accuracy in the conversion of each bit. Master clocking is performed by three separate precision lithium-tantalite crystals each clocking an associated PLL reference oscillator and dedicated to a single one of the processor's sampling rates. Analog signal output is developed by a proprietary discrete FET /bi-polar buffer. Four digital inputs are provided, 2 via coaxial, and 2 via optical connectors. One optical digital output and balanced or single-ended characteristic stereo analog output signals are available. The analog output signal characteristic may be phase rotated 1800 • Front panel controls: INPUT SELECTOR, PHASE. Front panel displays indicate: sampling rate; emphasis present; lock lost; standby mode. Frequency response 48 kHz sampling: DC to 22 kHz ± 0.15dB. 44.1 kHz sampling: DC to 20 kHz ± 0.15dB 32 kHz sampling: DC to 15 kHz ± 0.15dB. Decoding system  1 bit performing @ 24 bit equivalent static linearity. (500Hz, pass band filtered)  Oversampling clocked @ 768 times incoming data Jitter  MApproximately 20 picoseconds Linearity Within ± 0.3 dB @ - 120 db below digital maximum level Output filtration  3rd order (passive) with phase linearity to 80 kHz De-emphasis MPassive analog Distortion  Below 0.002% typical 20 Hz through 20 kHz.

JADIS modello JS-1                              Per offerta Telefonare/ e-mail

Convertitore Digitale/Analogico a valvole, costruzione in due telai con stadio d'alimentazione separato. 2 Convertitori D/A

 

MICROMEDIA  804  NUOVO DEMO                                       OFFERTA  €. 599,00 

NAKAMICHI DAC 101                                              Per offerta  Telefonare/  e-mail

NUOVO  ALIMENTAZIONE  12V


PREAMPLIFICATORI HTTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


  

MARK LEVINSON N°40                           Per offertaTelefonare/ invia  un e-mail

Nella storia della Mark Levinson ci sono stati molti prodotti che hanno rappresentato vere e proprie pietre miliari. In quest’illustre gruppo figurano il pre phono JC-1 (1972), il preamplificatore ML-1 (1977), i finali mono ML-2 (1977), il primo componente “Reference”, il finale mono N°20 (1986) e i leggendari Processore Digitale Reference N°30 (1991) e Pre Reference N°32 (1999). Questi prodotti, sin dalla loro presentazione, erano ovviamente destinati a diventare dei classici. In molti casi questi classici erano notevolmente piů costosi di qualsiasi altro prodotto della stessa classe, e spesso offrivano meno funzioni (o meno potenza) rispetto ad apparecchi concorrenti. Tuttavia sono diventati dei classici. Questi ed altri leggendari prodotti Mark Levinson condividono una straordinaria caratteristica, surclassando, infatti, qualsiasi altro apparecchio della loro categoria.  Il motivo principale per possedere un prodotto Mark Levinson č il livello delle prestazioni offerte, e sono proprio le eccezionali prestazioni quello che caratterizza il Media Console Mark Levinson N°40. Il N°40 č probabilmente il prodotto piů innovativo dei 29 anni di storia del marchio, sicuramente destinato ad entrare nella lista dei classici. Come i prodotti Reference anche il N°40 va considerato uno spartiacque, rappresentando una transizione importante tra come sono stati progettati i prodotti nel passato e come lo saranno nel futuro. Come i prodotti Reference il N°40 ingloba una raffinata esecuzione di molte tecnologie sviluppate e sperimentate in apparecchi Mark Levinson precedenti, insieme a nuovi dispositivi e nuove tecniche. Molte innovazioni tecniche sviluppate per il N°40 troveranno spazio in futuri progetti Madrigal. In effetti, č giŕ successo: sia il CD Processor Mark Levinson N°390S, di eccezionali doti timbriche, che il Proceed AVP2, nuovo pre audio/video, ne hanno giŕ beneficiato. Perché, allora, il N°40 non č stato designato come prodotto Reference? Per quanto buono sia, infatti, il N°40 non eguaglia le prestazioni di quattro Pre Reference n°32 e di quattro Processori Reference N°30.6. Le sue prestazioni sono molto vicine ai prodotti Reference, e la combinazione del N°40 con i N°32 e N°30.6 offre grandi risultati. Configurazione modulare Il N°40 č un progetto modulare in grado di accettare le piů svariate configurazioni: la sua configurazione standard viene incontro alle esigenze della maggior parte degli impianti. Sia il processore audio che quello video hanno diversi “slot” liberi per espansioni tramite i moduli opzionali, dei quali alcuni giŕ disponibili: moduli per ulteriori ingressi/uscite, per ulteriori R-Zone, per speciali esigenze di comunicazione, per interfacce sicure audio o video, per la gestione avanzata video, per risorse addizionali DSP. Configurazione Standard del N°40 3x ingressi compositi 6x ingressi S-Video 3x ingressi video component 6x SPDIF su RCA 4x Toslink 2x AES/EBU su XLR 1x SPDIF su BNC 1x coppia audio analogica bilanciata su XLR 6x coppie audio analogiche sbilanciate su RCA 8 canali audio principali d’uscita (bilanciati e sbilanciati) Uscite principali Composita, S-Video e Component 2x R Zones (zone remote/record, audio e video) Interfaccia utente grafica  La caratteristica del pannello frontale che attira maggiormente l’attenzione č la presenza di un piccolo schermo LCD sul processore video. Questo schermo puň essere usato in molte, utili, maniere inclusa quella di accedere a tutti i menů di setup e relative opzioni di controllo attraverso la nostra interfaccia utente grafica (GUI).

                                  

 

Denon AVP-A1HDA                                    Per prezzo scontato TELEFONARE/EMAIL

Preamplificatore HD Surround per applicazioni A/V certificato THX Ultra 2. Decodifica Dolby Pro Logic IIx, Dolby Digital, Dolby Digital EX, Dolby True-HD, Dolby Digital +, DTS, DTS ES, DTS 96/24, DTS-HD MASTER AUDIO, DTS HD High Resolution Audio, THX Ultra 2, THX Surround EX, HDCD. Dolby Headphone. 3 processori SHARC 32-bit. Convertitore D/A audio a 24 bit/192kHz per tutti i canali. Elaborazione AL24 Advanced. Nuovo DDSC-HD. Auto Setup e Auto Room EQ con mic. e MultiEQ XT Audyssey. Audyssey Dinamic EQ. Audyssey Dinamic Volume. Protocollo CEC per HDMI. 6 in e 2 uscite HDMI 1.3a, 36bit Deep Color, spazio colore xvYCC. Funz. Restorer audio compresso. 2 in USB con dec. MP3, WMA, AAC e FLAC. Internet Radio. 1 Ethernet. Denon Home Network. Wi-Fi IEEE 802.11 b/g. In Dock Control per basi ASD per iPod (opzionale) con controllo da telec. preamp. In e out multicanale 9.3, uscite pre XLR 9.3. RS232 e Denon Link 3. Conversione video con scaler interno fino a 1080p su HDMI. Ingressi video: 8 S-Video, 8 compositi e 6 component. Uscite video: 4 S-Video, 4 compositi e 2 component. Multi Zone fino a 4 stanze. Nuovo telec. elettrolum. + telec. per zona remota. Finitura Premium Silver

.For the ultimate home theater experience, Denon presents the ultimate A/V surround sound and video processor – the AVP-A1HDCI. With features and capabilities simply not found on any other controller, the AVP-A1HDCI sets the standard for both audio and video processing ability, along with state-of-the-art next-generation digital media connectivity with built-in Ethernet and Wi-Fi (802.11b/g) that lets you access music and photo files as well as Internet radio stations. An optional adapter lets you stream your favorite songs and videos from your iPod. Built with uncompromising attention to detail, the AVP-A1HDCI is equipped with an astonishing six individual power transformers to ensure the ultimate audio and video fidelity, eliminating interference between the various audio and video processing sections. Featuring unparalleled audio connectivity, the AVP-A1HDCI is equipped with 12 high definition video inputs (6 HDMI v1.3a/6 component) and an additional 16 standard definition inputs, with deinterlacing, upscaling and conversion to HDMI outputs via the Silicon Optix HQV Realta reference video processor. THX Ultra2 certified Processor All new circuit layouts that shorten audio and video signal paths for best picture and sound Discrete Devices for ultimate performance in each circuit block (D.D.S.C.-HD) Dolby TrueHD and DTS-HD Master Audio decoders To preserve original sound quality for the room's acoustics at any volume level, Audyssey Dynamic EQ loudness correction technology Realta sxT2 HQV processing for i/p and scaling Deep Color (30/36-bit) and xvYCC broader color space support Discrete construction and circuitry for highest quality video processing HDMI to HDMI scaling up to 1080p HD/SD video noise reduction functionality Network Audio and Photo Streaming Compressed Audio Restorer to enhance digital music files New user interface for easy operation, setup and digital media browsing (G.U.I.) GUI-assisted operation even during 1080p output from HDMI Dual HDMI outputs enabling simultaneous output to video projector and flat panel Three Analog and One Digital, Four Zone multi-source capability Zone 2 OSD with text, Album art is also available Web setup, save and load all settings via Ethernet

PROCEED PAV1                           Per offertaTelefonare/ invia  un e-mail

ROTEL RSP1068                           Per offertaTelefonare/ invia  un e-mail

NAKAMICHI CA1                              Prezzo offerta    €.1.499,00

McINTOSH C39                                Prezzo offerta    €.1.999,00

Six Audio and Six Audio/Video Inputs Audio Only: MM Phono/Aux, CD1, CD2, Tuner, Tape 1, Tape 2 Audio/Video: Satellite, TV, LV and/or DVD, VCR1, VCR2, Video/Aux, including S-video ins and outs. The capability to control two separate areas for multi-room applications. Balanced Stereo Outputs for lower noise (-105db). Separate Listen and Record Selectors allow you to listen and/or view one source while listening and/or viewing another source. Bass and Treble controls 12db boost and cut to match the program material to your taste. Variable Loudness Control matches the sound levels to the sensitivity of your ears. Low Distortion (under .002%) for clean sound. The Classic McIntosh Glass Front Panel will look new for years to come. Front panel audio/video input and headphone output for your convenience. Size: 17.5" Wide X 7.125" High X 17.25" Deep  Weight: 30 lbs ELECTRICAL: Response: stereo, mono and hall mode left, center and right front channels 20-20kHz (+0 -0.5dB), hall mode left and right surround: 100-7kHz (+0 -3dB), dolby pro-logic mode: left center and right front channels 30-16kHz, left and right surround channels 100-6.3kHz (+1 -1dB), dolby pro-logic and THX modes combined: left, center and right front channels 30-1kHz (+1 -1dB), left and right surround channels 100-6.3kHz (+1 -1dB). subwoofer 10-80Hz with 24dB rolloff. With rear panel high pass switch on, left, center and right front channels include high pass filter at 12dB rolloff. Distortion: left, center & right 0.005%, hall mode left and right surround channels 0.01%, dolby pro-logic and THX modes: left, center and right front channels 0.01%, left and right surround channels 0.1%. Noise and hum -100dB aux, -90dB phono, dolby pro-logic and THX modes -70dB. Output rated 2.5V. Maximum output 6V. Output impedance 600 ohms. Input sensitivity and mpedance: high level 0.5V (5V max, 2.1V max hall, dolby pro-logic and THX) at 22k, phono 5.0mV (60mV max) at 47k and 65pF. Tone controls: boost or cut 12dB. Voltage gain 14dB high level, 54dB phono. FRONT PANEL: Glass panel. Illuminated. Bass. Treble. Record switch: CD 1, CD 2, tuner, tape 1, tape 2, ph/aux, sat, tv, lv, vcr 1, vcr 2, v aux. Mode switch: mono, stereo, hall, cinema 1, cinema 2. Listen switch: CD 1, CD 2, tuner, tape 1, tape 2, ph/aux, sat, tv, lv, vcr 1, vcr 2, v aux. Volume. Delay switch (ms): 12, 16, 20, 24, 28. Balance, Loudness: flat to max. Pushbutton switches with indicator lights: sys cal, surr level: up or down, surr proc, access, rec lock, mute, power. Headphone, camcorder jacks: s-video, video, l and r. Indicator lights for dolby pro-logic and home THX audio. Digital volume readout. BACK PANEL: Audio outputs: area A: sur, center, subwoof, center, front. vcr 2, vcr 1, tape 2, tape 1, area B. Record processor: from and to. Balanced outputs. Audio inputs: v-aux, vcr 2, vcr 1, lv, tv, sat, tape 2, tape 1, tuner, CD2, CD1, aux, ph. Ground binding post. Video outputs (s or standard): mon B, mon A, vcr 2, vcr 1. Video inputs (s or standard): v-aux, vcr 2, vcr 1, lv, tv, sat. Data ports: v-aux, vcr 2, vcr 1, lv, tv, sat, tape 2, tape 1, tuner, CD 2, CD 1, aux, home, sum. Control connectors: to multi-room controller, tuner control, CD control, CD1 control. External sensors: area A and area B. 6 channel output. Surround calibrate switch: auto or man. Center speaker switch: none, small and large THX. Center fill switch: off or on. Subwoof switch: off or on. High pass filter switch: off or on. Power control jack. Ant/cable coax input. TV coax output. TV audio volume control, TV input switch: B or A. Channel switch: 3 or 4. AC outlets: 1 switched, 1 area B pwr amp, 1 area A pwr amp

DENON F100                                      Prezzo offerta    €.499,00

ROTEL  RDA 980                              Prezzo offerta    €. 499,00

Digital surrond adpter PROCESSORE ac3-pro logic  AUDIO VIDEO  3 INGRESSI


AMPLIFICATORI INTEGRATI HTTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 



ONKYOTX-NR 605  NUOVO EX DEMO
          OFFERTA PREZZO €.499,00

Meet the first of Onkyo’s new A/V receivers built to embrace high-definition media such as Blu-ray Disc and HD DVD.The TX-SR605 7.1-channel A/V receiver embodies this new generation, with its remarkable processing capabilities courtesy of HDMI (High Definition Multimedia Interface).With the ability to keep everything in the digital domain, the TX-SR605 provides complete control of every video and audio format available today. Bringing high-definition A/V processing to Onkyo’s renowned approach to sound gives this A/V receiver a distinct advantage in the home. Delivering the latest in usability and versatility—such as multi-room playback, a full connectivity suite (with switching and upconversion), room calibration and integrated system control—the TX-SR605 is poised to set new benchmarks in performance-driven home theatre. Advanced Features• DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus Decoding• HDMI (v. 1.3a) Audio and Video Processing• HDTV-Capable HDMI (2 Inputs and 1 Output) and Component Video (50 MHz) Switching (3 Inputs and 1 Output)• HDMI and Component Video Upconversion• Bi-Amping Capability for Enhanced Musicality and Power• Audyssey 2EQ™ to Correct Room Acoustic Problems and to Calibrate Speakers• Onkyo RIHD for System Control• Compatible with RI (Remote Interactive) Dock for the iPodAudio Features• 140 W/Ch Minimum into 6 Ω, 1 kHz, IEC (1 Channel Driven)• DTS®-ES™ Discrete/Matrix, DTS® Neo:6, DTS® 96/24, Dolby® Digital EX™, Dolby® Pro Logic IIx• H.C.P.S. (High Current Power Supply) Massive High Power Transformer• 192 kHz/24-Bit DACs for All Channels• WRAT (Wide Range Amplifier Technology)• Advanced 32-Bit Processing DSP Chip• 5 Digital Inputs (3 Optical/2 Coaxial)• Subwoofer Pre Out• CinemaFILTER™• A-Form Listening Mode Memory• Optimum Gain Volume Circuitry• Non-Scaling Configuration• Tone Control (Bass/Treble) for Front L/R Channels• Color-Coded 7.1-Multichannel Inputs• Independent Crossover Adjustment for F/C/S/SB (40/50/60/80/100/120/150/200 Hz)• Double Bass FunctionVideo Features• 5 S-Video Inputs and 2 Outputs• 5 Composite Video Inputs and 2 Outputs• Front Panel Auxiliary Input (for Camcorders, Game Consoles, etc.)Other Features• Powered Zone 2 and Zone 2 Line-Out for Playback in Another Room (Separate Source)• Deinterlacer with Faroudja DCDi Edge™ (Directional Correlational Deinterlacing) Technology• Pure Audio Mode• Color-Coded Dual Banana Plug-Compatible Speaker Posts• A/V Synchronization Function (Up to 100 ms in 10 ms Steps)• 40 FM/AM Radio Presets• RDS (PS/RT/PTY/TP)• 5 A/V Inputs and 1 Output• 2 Audio Inputs and 1 Output• Late Night Mode (High/Low/Off)• Digital Upsampling• Display Dimmer (3 Modes)• Headphone Jack• Sleep Timer (via Remote)• Battery-Free Memory Backup• Aluminum Front Panel• Preprogrammed RI (Remote Interactive) Remote Control with Mode-Key LEDs

MARANTZ SR 7300                    Per offertaTelefonare/ invia  un e-mail

MARANTZ SR 8300                    Per offertaTelefonare/ invia  un e-mail

MARANTZ SR 4500                    Per offertaTelefonare/ invia  un e-mail

 

                       

YAMAHA DSP-A1092                                         Per offerta Telefonare/ invia  un e-mail

  Features : Dolby Digital and Dolby Pro-Logic decoding; Cinema DSP modes compromising enhanced and theatrical Dolby Digital, TV Sports, Stadium, Disco, Rock Concert, Jazz Club, Church and Concert Hall; dynamic range adjustment; bass management; learning handset with macros and illuminated keys; 5x80W amplification plus 2x25W for front effects; centre speaker delay; test tone; onscreen graphicsConnections : Phono composite video and stereo audio inputs; S-Video four-pin mini DIN; phono preamp outputs; phono digital coaxial; TOSLink optical digital; 6.3mm headphone jackDimensions : 435(w) x 170(h) x476.5(d)mm

YAMAHA DSP-E1000                     Per offertaTelefonare/ invia  un e-mail


COMPACT CDR-WTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


PIONEER   W739               Per offertaTelefonare/ invia  un e-mail 


COMPACT DISC MULTI Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


                          

DENON DCM-5000                   Per offertaTelefonare/ invia  un e-mail

The Denon DCM-5000 offers a variety of control options that make it easier than ever for the user to organize and access an entire CD music library. Standard control functions such as play, stop, random play and so on can be activated from either the ergonomically designed front panel or via the supplied remote control—but that’s just the beginning. The user can also connect a standard PC keyboard directly to the DCM-5000 and enter disc/name information into the DCM-5000’s memory; once entered, this information is displayed for easy identification when the disc is selected for playback. Each CD can be assigned to any of up to eight musical categories (i.e., "Rock," "Jazz," "Country" and so on), and the user can choose to listen to only CDs within a particular category at any time. CD TEXT CDs are also supported.The DCM-5000 also includes a standard RS-232 serial port, allowing it to be controlled by a personal computer. And for the ultimate user interface, the Denon DCM-5000 is compatible with the Escient Tune-Base CD management system. Escient’s Tune-Base system, which has an Internet PC-based engine and proprietary software, connects to the DCM-5000 and the home theater system’s monitor TV. Because every CD has a unique Table of Contents, the Escient Tune-Base system is able to look up the names of each CD (using the CD’s unique identification code) and enters its title, artist’s name, song title and even album cover into a custom, personalized database. A graphical on-screen interface then allows the user to choose and play the desired music simply by clicking on album cover art and song titles!Advanced Engineering for Audiophile Sound QualityAlong with its unparalleled playback versatility, the Denon DCM-5000 provides true audiophile sound quality, superior to even esoteric high-end CD transport/ D/A converter combinations. Key to the DCM-5000’s superb audio performance is Denon’s new 24-bit ALPHA processing technology, a proprietary analog waveform reproduction technology that uses newly developed interpolation algorithms to provide 24-bit resolution from conventional 16-bit CDs. The DCM-5000 incorporates the finest available 24-bit Burr-Brown D/A converters for ultimate sound quality. The DCM-5000’s ALPHA processor also incorporates an adaptive digital filter that automatically adjusts the low pass cutoff frequency, for improved pass-band and impulse response. The result is a dramatic leap forward in CD sound quality, with vastly improved low-level detail resolution, outstanding dynamic range, precise imaging, a wider and deeper soundstage and a far more natural musical presentation.Built-In HDCD Decoding In addition, the DCM-5000 incorporates the Pacific Microsonics HDCD decoder chip to obtain the full sonic benefits of HDCD-encoded CDs, which offer greater resolution and dynamic range than standard CDs. HDCD is a multi-stage process that overcomes the limitations of the 16-bit CD format by using a patented system to extend the dynamic range of CDs to a 20-bit level, while remaining completely compatible with the CD format. The DCM-5000’s built-in HDCD decoder also improves the sound of non-HDCD discs, thanks to its high-precision digital filter. More than 2,000 HDCD titles from major artists are currently available, with the list growing rapidly. The Denon DCM-5000 carries a suggested retail price of $1,800, and the DCM-5001 100-disc slave changer unit is available at $1,300 suggested retail.Denon Electronics is Japan’s oldest audio company. Founded nearly 90 years ago, the company has a long history of technical innovations, including the development and first commercialization of PCM digital audio recording.100 disc CD Changer • Dual CD drives • Slide-out, non-removable linear CD tray • HDCD decoding via Pacific Microsonics PMD-100 filter/decoder • 24 bit Burr-Brown premium DACs (Audio output 1) • 20 bit digital filter, 18 bit Burr-Brown premium DACs(Audio output 2 - second zone) • CD Text • Disc naming function, via front panel controls or via external PC keyboard input, or via remote control • 8 Music groups • 40 step programming X 4 functions = 160 step programming capacity • 2 sets analog ouptuts (main and second zones) • 2 sets digital outputs (coaxial) • Digital inputs for connection to optional DCM-5001 auxilliary drives • Crossfade in analog mode • Up to 5 DCM-5001 aux drives can be connected to DCM-5000 control drive • Remote control supplied • RS-232/422 serial port • Composite video output for on-screen display • assorbimento: 42 W-misure: 434(B) x 243 (H) x 474,5 (T) mm-peso 16,2 Kg.
       

DENON DCM-5001                    Per offertaTelefonare/ invia  un e-mail

100 disc CD Changer • Companion to DCM-5000 • Dual CD drives • Slide-out, non-removable CD tray • 20 bit digital filter, 18 bit premium Burr-Brown DACs for both analog outputs • 2 sets analog outputs (main zone/second zone) • Digital connections (2 coaxial) to DCM-5000 for all digital transfer • Up to 5 DCM-5001 drives can be connected to DCM-5000 master drive • RS-232/422 serial port • misure :434(B) x 243 (H) x 474,5 (T) mm-peso 16,2 Kg.

                                    

DENON DN-1200C                       cod.0120 Prezzo offerta €. 990,00

Master unit for DN-1200F-TELECOMANDO

                                  

DENON DN-1200F                cod.0120 Prezzo offerta €. 1.450,00

Cd player slave unit -200 cd


LETTORI DVDTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


PROCEED DVD                         Per offertaTelefonare/ invia  un e-mail

PIONEER DVL 909                                  Per offertaTelefonare/ invia un e-mail

DENON DVD1730                             Per offerta Telefonare/ invia  un e-mail

PHILIPS DVD 711                             Per offerta Telefonare/ invia  un e-mail

 

DENON DVD-A1               Per offertaTelefonare/ invia  un e-mail

Lettore digitale per DVD Audio/Video, DVD-R, DVD-RW, CD, CD-R, CD-RW, MP3, Foto JPEG e Kodak. Certificazione THX Ultra. Nuovo circuito Progressive Scan Sil504 Silicon Image (solo NTSC). 5 regolazioni video tra cui contrasto e colore. Sofisticata sezione di conversione con 8 DAC audio a 24bit192kHz. Modalitŕ Pure Direct. Elaborazione AL24. Filtri Super Sub Alias e Noise Shaped Video. Chassis in rame a struttura ibrida per lo smorzamento delle vibrazioni. Sezioni di alimentazioni separate. Decoder HDCD. Riproduzione sia PAL che NTSC. Convertitore D/A video 14bit/108MHz. Denon Digital Link. Uscite audio digitali AC-3, DTS, e PCM 24/96. Uscita analogica stereo, uscite digitali (ottico e coassiale) ed uscite analogiche separate 5.1. Ingressi digitali ottici e coassiali. 2 uscite video composito, 2 S-Video, 1 Scart RGB e 1 component. Porta RS-232. Telecomando retroilluminato glow-key multifunzione in dotazione. Finitura in nero o oro.

THX Ultra Certified • Powered by the latest Silicon Image/DVDO PureProgressive (SiI504) Decoding Engine - highest quality progressive decoding engine available • Accurate 2:3 pulldown detection and reconstruction • Optimum processing for film content, video content, graphics content and mixed-mode content • New ESS Vibratto ES6038F MPEG/DVD-Audio Decoder • New highest resolution Analog Devices 108 MHz, 4:4:4, 14 bit Video D/A Conversion system featuring Noise Shaped Video processing(progressive and interlace output) • 4x Oversampling Progressive and 8x Interlace output  • (2)Composite and (2)"S" outputs  • 2X DVD read speed; 4X CD/CD-R/CD-RW read speed; with 4MB drive buffer memory • 4:3 Squeeze and Zoom Controls • Top audio performance, featuring 8 Burr-Brown 24-bit, 192-kHz PCM 1704 Audio DACs, with 2 per Main L/R Channels in differential mode • Pure Direct Modes to defeat unneeded portions of player for the ultimate in audio performance • Full Digital Bass Management for DVD-Audio, featuring Analog Devices 32-bit processor; 80Hz crossover with 12dB high and 24dB low pass slopes; Adjustable delay time • HDCD decoding • AL24 Processing Plus • MP3 Playback • Plays Audio/Video CDs; HDCDs; DVD-Video; DVD-R/RW (conditional); Audio CD-R/RW; MP3 CD-R/RW (128 or higher kbps recommended) • JPEG photo file viewer and Kodak Picture CD compatible • 24/96 digital outputs; optical and coaxial • Optical and Digital Inputs to allow player to be used as outboard D/A converter • DENON Link for connection to AVR-5803 • Internal Copper construction, and multi-layer top and bottom plates • 3 box, 6 block internal layout to isolate analog, digital and video circuits • RS-232C and remote in/out ports • Backlit remote control • Dimensions: 17.1"w x 5.4"h x 16.2"d • Weight: 40.8lbs. • Download Setup Tips for DVD-Audio Playback in pdf format, click on tech note icon .

DENON DVD A11          Per offertaTelefonare/ invia  un e-mail

■ Il nuovo circuito Progressive di FAROUDJA (Uscita NTSC / PAL) Oltre al Motion Adaptive Deinterlacer, che elabora i segnali video in unitŕ di pixel, la tecnologia  video a scansione progressiva ad alta definizione č resa possibile da un processore in modalitŕ mFilm, che supporta materiale pulldown 3:2 e 2:2. La tecnologia DCDi, famosa per la sua capacitŕ  m,di elaborare linee diagonali e bordi, produce immagini omogenee, naturali e prive di disturbi. m,Il DVD-A11 č inoltre dotato di 5 modalitŕ di scansione progressive che permettono all’utente di selezionare la conversione progressiva ideale per ciascuna delle sorgenti di programma scelte fra un’ampia gamma. ■ Convertitore Video Dual a 12-bit, 216-MHz Il DVD-A11 utilizza un totale di sei convertitori D/A video 12 bit/216 MHz per trarre il massimo potenziale dalle prestazioni del nuovo circuito di FAROUDJA. Il DVD-A11 utilizza convertitori D/A indipendenti per la riproduzione delle immagini Progressive med Interlacciate. Questi convertitori garantiscono una frequenza di campionatura molto elevata, pari a 216 MHz, con una sovracampionatura 8x utilizzata per il funzionamento in modalitŕ Progressiva ed una sovracampionatura 16x in modalitŕ Interlacciata, ottenendo come risultato la conversione D/A piů precisa attualmente disponibile. ■ Sezione Video Utilizzando un filtro con estese caratteristiche di sezionamento come filtro analogico passa basso, il DVD-A11 riesce a riprodurre le delicate sfumature dei segnali video, consentendo allo spettatore di apprezzare le immagini originali al massimo livello di realismo. ■ Alimentazioni indipendenti Sono state studiate alimentazioni indipendenti per lo stadio di elaborazione del segnale audio, lo stadio del segnale video ed altre sezioni, allo scopo di eliminare le interferenze reciproche. L’alimentazione di potenza che viene fornita ai vari circuiti contribuisce ad una elevata qualitŕ delle immagini e del suono. ■ Noise Shaped Video (NSV) ■ Filtro Super Sub Alias ■ Circuito di Riduzione Rumore Rumore di fondo e sfarfallio, caratteristici problemi dei segnali video compressi in formato MPEG, vengono efficacemente eliminati per produrre un’immagine video piů naturale. Inoltre, la riduzione del rumore 3D elimina i disturbi minori presenti nell’immagine video per riprodurre splendidamente solo le informazioni video richieste. ■ Modalitŕ Pure Direct Il DVD-A11 include due modalitŕ Pure Direct che migliorano ulteriormente la qualitŕ del suono. Ad esempio, durante l’utilizzo dell’uscita audio analogica, il Pure Direct puň disattivare le alimentazioni della sezione digitale, della sezione video ed il display frontale, che potrebbero influire sulla qualitŕ sonora dei segnali audio analogici. ■ Elaborazione AL24 per tutti i canali Denon ha ulteriormente sviluppato la propria tecnologia brevettata AL24 Processing per la riproduzione delle forme d’onda analogiche, a supporto della frequenza di campionatura di 192 kHz del DVD-Audio. Questa nuova tecnologia, AL24 Processing Plus, sopprime efficacemente  il rumore di quantizzazione associato alla conversione D/A dei segnali LPCM, per riprodurre i segnali di basso livello con un’eccezionale chiarezza, che mette in luce tutte le delicate sfumature musicali. ■ DENON Link Quando il DVD-A11 č collegato tramite un apposito cavo con terminali RJ-45, ad un amplificatore A/V dotato di ingresso Denon Link, il trasferimento bilanciato di segnali offre una tensione inferiore rispetto ai cavi coassiali o non bilanciati. Dato che DenonLink č molto meno sensibile  al rumore irradiato, garantisce il massimo livello di trasferimento di segnale. L’interfaccia Denon Link č in grado di trasferire un’uscita digitale di alta qualitŕ LPCM 24-bit / 192-kHz / a 2 canali (*1). ■ Costruzione multistrato Poiché i dati ad alta densitŕ registrati su DVD devono essere letti con assoluta precisione, le vibrazioni provenienti da sorgenti esterne o interne, come l’alimentazione, influiscono negativamente sulla qualitŕ del sonoro e delle immagini. Nel DVD-A11 sono state adottate diverse soluzioni per sopprimere queste vibrazioni indesiderate. Il fondo del telaio del DVD-A11 č caratterizzato da una solida struttura a 3 strati progettata per meliminare le vibrazioni. Robuste flange di rinforzo vengono utilizzate anche sul frontale e sul retro del telaio stesso. L’aggiunta di una copertura superiore a 2 strati e di materiale isolante, servono ad eliminare le vibrazioni esterne. E la base del trasformatore č realizzata di alluminio pressofuso che assorbe le vibrazioni esterne e quelle provenienti dal trasformatore stesso per garantire un funzionamento ottimale.

DENON DVD-900               cod.0900 Prezzo offerta €. 199,00

Lettore digitale per DVD, DVD-R, CD, CD-R, CD-RW e MP3. Convertitore D/A audio a 24 bit/192 kHz. Uscite audio digitali AC-3, DTS e PCM, uscita analogica stereo. Convertitore D/A video a 10 bit, 27MHz. 1 uscita video composito, 1 S-Video, 1 SCART (RGB). Pannello frontale in alluminio. Funzione di zoom x2 e x4. On screen display. Telecomando multifunzione in dotazione.Finitura in nero o oro.

Progressive Scan DVD Player • Progressive Scan featuring DCDi by Faroudja decoding engine • 3:2 Pulldown Detection • Plays CD/CD-R/CD-RW Discs, *DVD-R Conditionally • MP3 Decoder for encoded CD-R/RW Discs (128 or higher kbps recommended) • 12-bit, 54-MHz Video DAC • Burr-Brown 24-bit, 192-kHz Audio DACs • 2MB Memory Buffer to decrease layer change pauses or pickup dropouts • Selectable 24 bit, 96 kHz PCM output pass-through capability • PCM, DD, dts compatible Optical and Coaxial Digital Outputs • Component, S-Video and Composite video outputs • Passes Below Black(Pluge) for proper Monitor Calibration • Picture Zoom • Dimensions: 17.1"w x 3"h x 8.3"d

DENON DVD-800                        cod.0900 Prezzo offerta €. 159,00
Lettore digitale per DVD, CD, CD-R, Video CD e DAD. Convertitore D/A audio a 24 bit/96 kHz.Uscite audio digitali AC-3, DTS e PCM, uscita analogica stereo. Convertitore D/A video a 10 bit.1 uscita video composite, 1 S-Video e 1 Y/C(SCART).Filtro Super Sub Alias. On screen display.Telecomando multifunzione in dotazione.Finitura nero I dischi CD-R registrati senza un corretto procedimento di finalizzazione potrebbero risultare leggibili soltanto in parte o completamente illeggibili.

DVD Player • Plays CD, DVD, Video CD, CD-R and CD-RW music discs • Built-in MP3 Decoder for CD-R/RW encoded discs (128 or higher kbps recommended) • 10 bit, 27 MHz video DAC • 3MB Memory Buffer to decrease or eliminate layer change pauses or pickup dropout • 24 bit, 96 kHz DACs • Real 24 bit, 96 kHz digital output capability • Dolby Digital & DTS digital outputs • Optical digital output • "S" & Composite video outputs • Subwoofer output • Component video outputs (Y, Pr, Pb) • On Screen Display • Picture Mode Adjustments • Passes PLUGE (below black) • Dimensions: 17.1"w x 3.2"h x 9.7"d

 

DENON DVD2500                       Per offerta Telefonare/ invia  un e-mail

DENON DVD1500                   Per offerta Telefonare/ invia  un e-mail

Lettore digitale per DVD, CD, CD-R, Video CD e DAD. Convertitore D/A audio a 24 bit/96 kHz.Uscite audio digitali AC-3, DTS e PCM, uscita analogica stereo. Convertitore D/A video a 10 bit. 1 uscita video composite, 1 S-Video, 1 componenti e 1 Y/C (SCART). Nuovo meccanismo. Telecomando multifunzione in dotazione.Finitura in nero o oro.Il sistema On-screen Display consente una facile visualizzazione ed utilizzo delle funzioni.Dotato di uscite video component e SCART, il DVD 1500 adotta un sistema di trasmissione a doppia velocitŕ ed č in grado di riprodurre CD-R audio (*1).(Nota; *1 I dischi CD-R registrati senza un corretto procedimento di finalizzazione potrebbero risultare leggibili soltanto in parte o completamente illeggibili.)

DVD Player • "S" video output; composite video output • DTS compatible digital output • CD-R Playback compatible • 24 bit, 96 kHz DACs • Component video outputs (Y, R-Y, B-Y) • Dolby Digital (AC-3) digital output • Plays MPEG-2 DVD's; also plays MPEG-1 Video CD's, and music CDs • GUI graphical user interface • 2 digital outputs - 1 optical, 1 coaxial

MARANTZ DV 4300                         Per offerta Telefonare/ invia  un e-mail

DENON DVD F100                       cod.0120 Prezzo offerta €. 300,00

Lettore digitale per DVD, CD, CD-R e Video CD. Convertitore D/A audio a 24 bit/96 kHz. Uscite audio digitali AC-3, DTS e PCM, uscita analogicastereo. Convertitore D/A video a 10 bit/27MHz. Circuito Virtual Surround Sound. 1 uscita video composito. +Filtro Super Sub Alias. Telecomando multifunzione in dotazione

PIONEER DV-626-D                                                                €. 300,00

SHARP DV 560                                 Per offerta Telefonare/ invia  un e-mail


REGISTRATORI A CASSETTE Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


NAKAMICHI CR 5                             Per offertaTelefonare/ invia  un e-mail

NAKAMICHI RX 202                                 Prezzo offerta €. 439,00

NAKAMICHI DR-3                              COD.0150  Prezzo offerta €. 300,00

NAKAMICHI LX3                            Per offerta Telefonare/ invia  un e-mail

NAKAMICHI 480                               COD.0150  Prezzo offerta €. 220,00

NAKAMICHI       BX 2                          COD.0099 Prezzo offerta €.160,00

TECHNICS RS-BX404                             Prezzo offerta  €.110,00

TECHNICS RS-TR474                     Per offertaTelefonare/ invia  un e-mail 

TECHNICS   RS-B755                              Prezzo offerta   €.140,00

DENON       DRR-M30                                Prezzo offerta €. 230,00


SINTONIZZATORITelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


NAKAMICHI ST 7                                     Prezzo offerta    €.  750,00

The Nakamichi ST-7 / ST-7E is a digital synthesis tuner with the Schotz Noise Reduction technology. This revolutionary system improves effective stereo sensitivity by about 9db and lets you enjoy clean stereo on broadcasts that previously could only be received in mono. Other features include seek and manual tuning as well as 16 FM/AM presets that can be programmed at random, thus combining convenience with top-level capability

NAKAMICHI TUNER2                                 Prezzo offerta    €.490,00

PROTON AT470                                           Prezzo offerta    €.290,00 

                                   

SANSUI  TU317                                         Prezzo offerta    €.  200,00

PIONEER   F443                                         Prezzo offerta    €.  149,00

JVC  TU3                                                      Prezzo offerta    €.  180,00

AIWA  XT-003                                              Prezzo offerta    €.  150,00

TECHNICS   ST-Z450                                     Prezzo offerta    €.  100,00


EQUALIZZATORI  & PROCESSORITelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


 

KENWOOD GE 730                    Prezzo offerta    €. 399,00

dbX-2BX EXPANDER                          Prezzo offerta    €. 399,00

2BAND DYNAMIC RANGE EXPANDER  dbx 2BX two band dynamic range expander. The limitations of the recording process requires record and tape manufactureers to sacrifice nearly half the dynamic content of live music. Crescendos and loudness variations containing vital musical information must be reduced in scale, compromising the presence and excitement of the original performance. A dynamic range expander is a complex electronic system which makes quiet sounds quieter and loud sounds louder to restore the dynamics sacrificed in the recording process

PIONEER MA9                                  Prezzo offerta    €. 299,00

ROTEL  RSP 900                       Prezzo offerta    €. 499,00

SELETTORE DI  DIFFUSORI

TECHNICS SH-8055                 cod.0220 Per offerta Telefonare/  e-mail

SANSUI DS7                                      Per offerta Telefonare/  e-mail

TECHNICS SH-800                             Prezzo offerta    €. 350,00

TECHNICS SH-8055                           Prezzo offerta    €. 250,00


MIXER Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


TEAC MIXER  model 2                        Prezzo offerta    €. 250,00

 


PROIETTORI  Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


INFOCUS IN72                              Per offertaTelefonare/ invia  un e-mail

Description  The InFocus IN72 DLP home entertainment projector offers all of the excitement of attending your first rock concert! You can’t always get what you want? With the IN72, you can always get it – in sports, gaming or television entertainment. It’s like going out on the town without having to leave home! With its stylish design, it delivers more performance than a plasma TV – at less cost. Go for it! Live large. Invite your guests to see the latest movies in your own screening room. The IN72 truly brings it all back home. Product Identifiers  Brand InFocus  Model IN72  MPN IN72  UPC 00797212665706, 797212665706  Key Features  Display Technology DLP  Resolution 854x480  Image Brightness 900 ANSI Lumens  Contrast Ratio 2000:1  Form Factor Portable  Image  Max Resolution 1024 x 768 (XGA) Image Size (Diagonal) 32.47 in. - 156.46 in.  Image Aspect Ratio 16:9  HDTV Formats 1035i, 1080i, 1080p, 480i, 480p, 576i, 576p, 720p  Screen Distance 5 ft. - 20 ft.  Synchronization Range Horizontal 31.5-80 kHz  Synchronization Range Vertical 50-85 Hz  Analog Video Format NTSC, PAL, SECAM  Color Support 24-bit (16.7M colors)  Technical Features  Platform Mac, PC  Front Panel Controls Keypad  Remote Control Features Illuminated Remote  Connectors Component, Composite (RCA), DVI, HDMI, S-Video  Interfaces  Video input 4 Pin - Mini DIN (S-Video), Component Video, Composite Video, DVI, HDMI x 1 Lamp  Lamp Type SHP  Light Source Power 200W SHP  Light Source Life 3000 Hours  Dimensions  Width 14.2 in.  Depth 14.2 in.  Height 4.7 in.  Weight 9.3 lb.  Miscellaneous  Features Keystone Correction  Projection Method Ceiling, Front, Rea

PLANAR   PD7060                                      Per offertaTelefonare/ invia  un e-mail

Planar PD7060 DLP Projector A 3600:1 contrast ratio, 1,000 lumens, and a native 720p HD resolution, the Planar PD7060 endows every projected image with a lush, detailed realism. Now augment this awe-inspiring performance with wide-ranging connectivity, DLP's DarkChip technology, and menus that can virtually read your mind. Be warned: This projector has been known to turn enthusiasts into addicts. Planar Planar PD7060 DLP Projector Planar PD7060  •DLP™ Display Technology •1000 ANSI Lumens •1280 x 720 Native Resolution •16:9 Native Aspect Ratio •3500:1:1 Contrast Ratio •8.0 lbs •HDTV Ready

EPSON  TW 3800                         Per offertaTelefonare/ invia  un e-mail

Resolution 1920x1080  Type LCD  Weight (kg) 7 Rated fan noise (dB) 22 Throw ratio 2.4-5.1 Rated contrast 18000:1  Aspect ratio 16:9  Max image size (in) 300  Dimensions (hwd, cm) 15x45x39  Rated brightness (Lumens) 1800  Phono audio in 0  PC in 0  S-Video in 1  HDMI in 2  RGB Scart in 1 Component in 1  Accepts 1080p Yes  24fps Yes  HDMI 1.3a Yes  Composite in 1  DVI in 0  HD Ready Yes  Full HD Yes

MITSUBISHI  HC 6000                         Per offertaTelefonare/ invia  un e-mail

DATI TECNICI DICHIARATI  Proiettore: LCD (3 matrici da 0,74”) Risoluzione: 1920x1080 pixels Compatibilitŕ segnali: fino a 1920x1080p, comprese 480i/p, 576i/p, 720p, 1080i Sistemi TV: PAL, NTSC, SECAM Luminositŕ: 1000 ANSI lumen Contrasto: 13000:1 Lens Shift: orizzontale e verticale Lampada: UHP, 160 W Durata lampada: 5000 ore (modalitŕ eco) Rumorositŕ: 19 dB Consumo di corrente: 250 W Connessioni: 2 HDMI, VGA, Component, S-Video, Composito, RS232 Dimensioni (LxAxP): 334mm x 135mm x 352mm  Peso: 5,6 kg  DA SEGNALARE+ Full HD+ Ingombro ridotto+ Contrasto+ Doppia HDMI + Shift e zoom+ Silenziositŕ

SHARP XV-C1E                              Per offertaTelefonare/ invia  un e-mail

SHARP XV-C100E                          Per offertaTelefonare/ invia  un e-mail


PROCESSORI VIDEOTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


DVDO                                 Per offertaTelefonare/ invia  un e-mail   

PANASONIC                                         Prezzo offerta    €. 559,00

 

DBX-DAV 600G                           Per offerta Telefonare/ invia  un e-mail

Audio video program route selector A switching console for people who have more equipment than their receivers have inputs.
* 3 video input/output (play & record, that is) plus one video input-only (for laserdisc or DVD)  * 3 audio input/output  * Multiple audio and video effects processing loops for noise reduction units, equaliser, etc.  The only difference between the video and audio sections is the passing of video through the circuit. I have almost always used it for six audio connections and ignored the video 


ALTOPARLANTITelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


Infinity infinitesimal                COPPIA Prezzo offerta €. 400,00

INFINITY FILTRI PB Renaissance 80  Prezzo offerta €. 150,00

 CROSSOVER ORIGINALE PASSA BASSO IDEALE PER AUTOCOSTRUTTORI O  RICAMBIO ORIGINALE PER :REINASSANCE80,REINASSANCE90 DISPONIBILI  POCHI PEZZI AFFRETTARSI

INFINITY FILTRI PH Renaissance 80         Prezzo offerta €. 170,00

CROSSOVER ORIGINALE PASSA ALTO PER  EMIT ED EMIN IDEALE PER AUTOCOSTRUTTORI O  RICAMBIO ORIGINALE PER :REINASSANCE80,REINASSANCE90 DISPONIBILI  POCHI PEZZI AFFRETTARSI

INFINITY EMIT 902-5228    €.250,00 PREZZO OFFERTA €.169,00

IDEALE PER AUTOCOSTRUTTORI O  RICAMBIO ORIGINALE PER :SIGMA,EPSYLON,OMEGA,REINASSANCE80,REINASSANCE90 



CAR STEREOTelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


 

NAKAMICHI TP 1200                                 Prezzo offerta €. 1.200,00

FM Tuner Frequency Range: 87.5-107.9 MHz in 200 kHz steps or 87.5-108.0 MHz in 50 kHz steps Sensitivity: Better than 25 dBf 50 dB Quieting Sensitivity: Better than 25 dBf Signal-to-Noise Ratio: Better than 65 dB Stereo Separation: Better than 30 dB at 1 kHz Antenna Input: 75 ohms AM Tuner Frequency Response: 530-1,710 kHz in 10 kHz steps, 522-1,629 kHz in 9 kHz steps, or 531-1,602 kHz in 9kHz steps Sensitivity: 32 dBµ Preamplifier Frequency Response: 5-50,000 Hz ± 3 dB Output Level / Impedance: 1 V / 600 ohms Total Harmonic Distortion: Less than 0.018% Tone Controls: Bass: Mid: treble: ±8 dB at 20 Hz ±8 dB at 200 Hz ±8 dB at 20 kHz General Power Requirement: 14.4 V DC, negative ground (operable within 10.8 to 15.6 V) Current Consumption: 1.5 A max. Dimensions (WxHxD): Tuner/Control Unit: Preamplifier Unit: 178 x 50 x 165 mm 7 x 1-15/16 x 6-1/2 in. 229 x 65 x 278 mm 9 x 2-9/16 x 10-15/16 in, Approximate Weight: Tuner/Control Unit: Preamplifier Unit: 1.1 kg / 2 lb. 7 oz. 3.3 kg / 7 lb. 4

NAKAMICHI IND7                                      Prezzo offerta     €.1.890,00

NAKAMICHI  TD7                                      Prezzo offerta    €.   150,00


RADIO D'EPOCATelefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


PHILIPS BX290U05                       cod.0060 Prezzo offerta    €. 150,00

LOEWE OPTA PLANET                     cod.0078 Prezzo offerta    €. 200,00


Scrivici il prodotto che stai cercando    info@newaudio.it


Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


Attenzione 

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a  info@newaudio.it

Il presente listino sostituisce ed annulla ogni precedente.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riporta
ti. Prezzi franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietŕ e registrati alle rispettive Case Produttrici


Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo Telefona 0174 670100  o  invia  un  email  a  info@newaudio.it per   avere  l'ultimo prezzo 


Audio Video s.a.s.  Largo Cesare Campana N°2 (stazione ffss)   Mondově 12084  (CUNEO) ITALIA  tel.0174 670100 fax 0174 555700     info@newaudio.it